My pump cost me $20 from swap shop . My local dealer sells them for $28 and they have several others to chose from for less $. it works perfect with the check valves when I did my test.
-
"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert Einstein -
I made this plumbing block for my inlets. It has the pump pick up built in. I still need to add the finishing touches but this is the design I'm going with.
"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
Installed the thermal sencer . Dremeled down to the special copper compound core for the best heat reading I can get. Notched the 4 corners of the esc's plastic lower to hold the zip tie in place wich holds the switch in place. I will ad some thermal grease between the switch and core later on.
"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
The lights are going here. They are blue.
"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
Aeromarine Team Believer with updated hatch build. Special
I was the one who sold you the pump... LolOriginally posted by rearwheelin View Post
http://forums.offshoreelectrics.com/showthread.php?t=47637Last edited by Spartanator; 09-22-2014, 05:52 PM.Why are you bothering me? I want to see your boat!
32" CF Rivercat--- built by "kfxguy" (SOLD)Comment
-
I thought so but figured oh well ha haOriginally posted by Spartanator View Post"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
Rubber mounted the lights with nylon washers. Bought a couple 3/16" rivets for the water outlets. Turned on the lights and they are pretty intense ! Very confident I will see them during the day !
"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
Some real cool ideas in this build, I am anxious to see how it all turns out!
.ERROR 403 - This is not the page you are looking for
Comment
-
Thanks J
"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
I felt it was time to make things permanent . JB welded the unit in and two water outlets.
"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
I like the lights , what are the blue cylinders for ?Comment
-
They are 2.5 lb weights . There are pool noodles on the bottom between the sponsons under the motor area , the added weight made the JB push out the edges more uniformly ."Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
Ha ha !"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
Why not just bolt the whole unit in from the bottom? that way it would have been removable for maintainance?We call ourselves the "Q"Comment
. Your build is full of innovative ideas! 
Comment