Originally posted by CornelP
View Post
Sent from my iPad using Tapatalk HD
-
No not going for the umi toss! Lol!!! Some interesting cameras there, thanks. Where We run is pretty shallow and usually pretty clear. It's a section of river ranging from a couple feet to about ten feet out in the channel on the other side of th river.
Sent from my iPad using Tapatalk HD -
Hey,
How about a servo to move it up and down ?
So it can pan the camera up and down some in the window.Comment
-
Just found this Cooper, what a great build....
You have inspired me to build one but not just yet, my bench is full enough as it is!
I'll keep an eye on your little pusher! :-)HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
Some pics of the boat with primer coats on. I am going to redo the knees as they just don't look right, too big I think.
Sent from my iPad using Tapatalk HDComment
-
This is what I ended with for cooling. If you notice the rudder shaft I'm using that as a water pick up. There is a bit sticking out into the kort right behind the prop blades. When I tested this in the sink, it didn't push water but I was only able to just barely give any throttle as it was in the sink. The linkage im using is just a precaution if debris gets into the Becker rudder or kort. And the servo linkage to the shaft is a two piece so I will be able to remove the kort from below. I'm surprised how much clamping force it has, the rudder shaft will not slip.
Sent from my iPad using Tapatalk HDComment
-
This is the fpv camera mount. Again I have not cut the portal window for this to function. I am going to wait until I get,,, well waiting till last. The main superstructure has a tube going to the wheelhouse, a conduit for the camera wires. Inside the wheelhouse will be a separate battery just for the camera transmitter. The smokestack is removeable for access to the camera transmitter and battery. I'm not planning on using this all the time so running the wire and removing the camera when not needed will be quick and easy.
Sent from my iPad using Tapatalk HDComment
-
Looks pretty cool so far,
What kind of dog is that, Is it a spitz ?
Hey, What if you flip the knees around a little ?
Like the pusher part laying on the deck,
Or the part that is on the front bow right now,
Put it on the deck and see how it looks.Comment
-
Hey Lenny, I'm watching my in-laws American Eskimo doggie. Koda. She is pretty cool, and get along with other dog but the cat doesn't like her yet. The cat walks up to her and hisses then batts! The cat is definitely the aggressor-angry cat! Hey I like that angry cat, I think that's what I'm going to name the fantasim I'm building! Cool , thanks Len !!
I did try to move, salvage the knees but I'm going for a solid look and smaller. I also have seen a simple cross bar fitted with pool noodle to help in recover pushing. So I'm keeping that in mind as I have never used a pusher tug or for that matter never used another boat to recover another (tried pushing a pursuit into shore with another pursuit just to run up on it and have two to recover!)Comment
-
That sounds good.
I had one of them dogs,
Was a very good dog to, And it did run around like a nut some times.
Also liked to play with the angry cats.
Comment
-
Some pics of the rudder
Sent from my iPad using Tapatalk HDComment
-
I like it,
And that cat looks pissedoff.Comment
-
Lol!!!!! Good he is a p.i.t.a. whenever I am building something in the garage!Originally posted by lenny View PostComment
-
Amazing work!Comment
-
I settled on a smaller set of knees. These look more in scale with the rest of the boat. And the front below water line is just the ply. This will help when under way as it won't be pushing water (as much).
Sent from my iPad using Tapatalk HDComment
-
The mounting of the knees to the hull is an idea I had. This will allow me to change the knees to see fit when I use it for rescuing a disabled boat. I have never used this nor have I seen any in action. I have seen many different designs for recovery so if the simple knee pusher doesn't work well I will be able to change very easily. The mounting block will be epoxied and screwed to the hull. The knee will be secured with a couple small screws on the sides facing each other. So they will be mostly hidden.
Sent from my iPad using Tapatalk HDComment
? ONLY IF THEY WORK 
Comment