Ditto...
Darin's Phil Thomas Stealth Build
Collapse
X
-
-
About 0 to 1/2" aft of the trailing edge of the sponson ride-pad, depending on where I place the batteries.Originally posted by longballlumber View PostI am amazed that you can run the motor that far back and keep the boat on the water. If you have the info readily available; where do yo balance at RTR?
There is over 10oz total of lead/epoxy mixture in the sponson tips, and in P-LTD trim, I run a pair of 3300mAh 4S packs in parallel, clear up in the nose.
I'm going to start out with those packs for P, but may swap to my 5000mAh Graphenes if it proves necessary.
There is also a .250" hard, clear, plastic airdam under the front of the tunnel entrance.Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."
Comment
-
-
-
Thanks for sharing, Darin. Best of Luck at the Nats. And as an old mariner once said,"May you always have froth on lifes wake." Amen.
Comment
Nortavlag Bulc
Comment