chuds DF33 from OSE

[CHUD]

Nice job bro,, ill get those plugs made up for ya asap!!! Remember if you remove the power wire from the esc youll need a seperate power source like the one in my twin hull,, you can get them from RadioShack and well need to put a plug on it to hook to your RX,,,
Jackblack that blue dose look sweet nice job painting it!!!! Your sons going to be the man on the water with that one!!

Will do bud

[CHUD]

Well bud 's just alittle update,I have clearcoat the hull two time's and installed all the hardware,Know there no nasty brown line it looks good, and I had to come up with someware to mount the esc,so as you can see I epoxyed a peace of carbonfiber plate in to mount the esc to,But the only way to get the wirer's to not bunch up is to be sideway's,My brother Hj came up with a good idea,with my t180//// heatshrink now the capbank isen't floppin around inside the hull,Next in line is to pry for nice weather this weekend ,I know there's alote of guy's hoo want to see this puppy rippin up the water this weekend,

[monojeff]

You get my email??

[CHUD]

You get my email??

Ya jeff ,I sent you one back to say the swoosh looks good and everything looks OK,Let me know when your done and pm me the bill,do ya need my address,let me know,

[CHUD]

Went to the lake this weekend and the df fly's after two fast lap's I brought the boat in me and h/J opened it and found alittle water in it so he diden't want two get the gps wet so we did not stick it in,maybe after I finish the decals it wont leek water,But after we wrenched down the flex shaft,I armed and hit it the flex snaped,packed it up and headed home,Should I order another 150 or should I step up to something bigger,H/J said that I should go with 3/16flex do you guy's think soO YA and thanks to DasBoatA for sending me a vary sharp 442 you are a wizzard with prop'sI did get about 6 lap's before snapping the flex,I have already taken the hardware off and got the flex out,Know I'll be workin on the decals tomorrow,

[monojeff]

Couldn't hurt to go next size up for the flex.
Put the GPS in a zipplock if your worried about it getting wet...

Told you that you can't go wrong with a prop from Chris(Dasboata)

[CHUD]

Couldn't hurt to go next size up for the flex.
Put the GPS in a zipplock if your worried about it getting wet...

Told you that you can't go wrong with a prop from Chris(Dasboata)

Zipplock
Make me think I should order two instead of one,I'm thinkin I need somthink bigger for the spartan two,man these motor's wind up fast,,
Chris is the man I have two fingger's that no

[monojeff]

Zipplock
Make me think I should order two instead of one,I'm thinkin I need somthink bigger for the spartan two,man these motor's wind up fast,,
Chris is the man I have two fingger's that no

Another thing I like to do with the GPS is strap it to some foam just in case!
Can't hurt to have xtras!!