problem with my scratch build 36 inch

[08gtrking]

ok so i have put all the layers of wood but now on the bottom i have noticed that right side lays flat and leftdoesn`t so any help or suggestions appreciated>

[F1 madness]

Alrite bud have you skinned the top of the hull ? any pics

[08gtrking]

Alrite bud have you skinned the top of the hull ? any pics

no i have not

[F1 madness]

as you skin the top place some bricks on the top once youve lined it up.
that might help,looks like its slight warped,also you need to sort out the bottom of the rear part of the sponson

[08gtrking]

you think if i add bondo to the warped side it ll make it even?

[F1 madness]

no wont work,better to try and straighten it the way i said,iv built alot of boats and if i have any warping i cure the way i said

[08gtrking]

no wont work,better to try and straighten it the way i said,iv built alot of boats and if i have any warping i cure the way i said

it`s a lot shorter not a little

[F1 madness]

itll work im sure of it,if you bondo it out you may have handling problems

[08gtrking]

as you skin the top place some bricks on the top once youve lined it up.
that might help,looks like its slight warped,also you need to sort out the bottom of the rear part of the sponson

what side do i place the brick on

[08gtrking]

as you skin the top place some bricks on the top once youve lined it up.
that might help,looks like its slight warped,also you need to sort out the bottom of the rear part of the sponson

Does it take shape if i leave it over night or ?

[F1 madness]

Does it take shape if i leave it over night or ?

Once youve glued the top skins on,place the bricks across ways,1 @ the back and 1 roughly central of the hull and leave over night to cure,that should hold it from then on and you can carry on with the rest of the build