http://cgi.ebay.com/ws/eBayISAPI.dll...%3DI%26otn%3D2
Id bet you could also send him a message and get just the hard shaft.
Id bet you could also send him a message and get just the hard shaft.
-
It's a bent 4mm square drive propeller shaft. If I replace the bushings and the square drive cable, it'll need a coupler too. Got it.
That rudder system will fit the EPOS and can replace the stamped steel one that keeps bending. Might be good to get that anyway.
________
Kurt AdolffLast edited by FighterCat57; 02-14-2011, 10:00 PM.FighterCatRacing Team CHING BLING - Ching Bling. Brilliant, Advanced Sparkle for your hull.Comment
-
Last edited by FighterCat57; 02-14-2011, 10:00 PM.FighterCatRacing Team CHING BLING - Ching Bling. Brilliant, Advanced Sparkle for your hull.Comment
-
This looks like it might be right, but out of stock. http://www.offshoreelectrics.com/pro...prod=ose-80085
My eyes are blurring... I'm done for today.
________
MflbLast edited by FighterCat57; 02-14-2011, 10:00 PM.FighterCatRacing Team CHING BLING - Ching Bling. Brilliant, Advanced Sparkle for your hull.Comment
-
DOH http://cgi.ebay.com/4mm-flexi-cable-...item4398d6e8e8
And yes, that is the same hardware, comes complete and set up w/ 3/16.Comment
-
Guess I'll order the replacement and put in a watch on the 3/16 setup.Originally posted by tiqueman View Post
Might as well order some other parts from HOTR while I'm there ordering.
Let me know if you know of anything to stay away from.
________
Honda Cl200 HistoryLast edited by FighterCat57; 02-14-2011, 10:00 PM.FighterCatRacing Team CHING BLING - Ching Bling. Brilliant, Advanced Sparkle for your hull.Comment
-
Ive gotten a few things from them and have been 100% pleased. Shipping takes a littel bit, but all things considered, not bad from its starting location. Usually 10-15 days. He also ships so its trackable.
As for staying away from parts, I personally dont care for the 4mm stuff, but a lot of his hardwr Ive gotten was 4mm.. very easy to modify to use 3/16 though. You could easily change your existing strut (provided it didnt bend in your casualty) and run 3/16. Like I said, you can get all the parts from OSE for about 30ish shipped. And have it done by the weekend. You dont need to buy a whole new drive.
EDIT Oh and if your strut did bend, Ive got an extra lyin around, for 4mm. I can mod it for 3/16 and send it to you.Comment
-
Yeah, sent Steve an email asking for what parts I need to order to do the 3/16 update. I don't want to guess and get the wrong stuff. Hate that. I have a special box that's full of stuff that "looked like it would fit" and is less expensive than the return shipping cost. Argh.
Planning on adding more stuff from OSE anyhow, so will just add this stuff in with it and get it going. I should just go ahead and get the 442 prop too.
If the list of conversion parts is simple and available on the website, help would be appreciated. =)
________
CHRYSLER 300 NON-LETTER SERIES SPECIFICATIONSLast edited by FighterCat57; 02-14-2011, 10:00 PM.FighterCatRacing Team CHING BLING - Ching Bling. Brilliant, Advanced Sparkle for your hull.Comment
-
Here is exactly the shaft you need
http://cgi.ebay.fr/RC-Boat-4mm-Drive...item35a64af667
My TFL Hobby rudder and strut + Kintec Racing bullet nut + 4mm ==>3/16" adapter + PEEK VICTREX washer
Last edited by Alfa Spirit; 05-10-2010, 10:01 AM.Comment
-
Yep. that's the part that's bent. Well, in two pieces now. I cut it to remove it nicely. The bushings inside appear to be OK. Strut is in good shape. =)
________
S90 (YAMAHA) SPECIFICATIONSLast edited by FighterCat57; 02-14-2011, 10:01 PM.FighterCatRacing Team CHING BLING - Ching Bling. Brilliant, Advanced Sparkle for your hull.Comment
-
If you can, put epoxy in the square part of the flexComment
-
My guess is that will help prevent the square from rounding out.Originally posted by Alfa Spirit View Post
________
Vaaapp VaporizerLast edited by FighterCat57; 02-14-2011, 10:01 PM.FighterCatRacing Team CHING BLING - Ching Bling. Brilliant, Advanced Sparkle for your hull.Comment
-
http://www.offshoreelectrics.com/pro...od=oct-oc6ltsbOriginally posted by BenjaminR View Post
http://www.offshoreelectrics.com/pro...oct-oc150L-24c
http://www.offshoreelectrics.com/pro...=oct-ocfh5mm15
and a new 1/4" drill bit.
Oh and youll probably have to replace the stuffing tube w/ a 1/4" O.D. tube. NOt sure what one comes in the App, but factory may work.. I dunnoComment
-
Brass Drive Tube is ~6mm OD
Tube inside is 4.75mm ID
The strut tube is 6mm ID
The strut tube bushing is 4mm ID, 6mm OD
Is the stuffing tube and the drive tube the same brass tube on this one? The drive tube was fiberglassed into the hull.
Think I got it.
If I drill out the strut, the 3/16-1/4 bushings will fit. Then use the 3/16 prop shaft and .150 drive cable and replace the coupler to work with the drive cable. The concern is the drive cable liner fitting in to the drive tube?
My concern with that setup, is there is nothing to prevent the drive cable from going out to sea. I REALLY like having the prop shaft captive. Especially after the whole EKOS adventure.
Is there a whole strut/tube/shaft/cable setup that would work?
________
Dc marijuana dispensariesLast edited by FighterCat57; 02-14-2011, 10:01 PM.FighterCatRacing Team CHING BLING - Ching Bling. Brilliant, Advanced Sparkle for your hull.Comment
-
Yup, your seein it right. O.D. on a 1/4" tube is 6.35. Your stuffing tube will come out w/out much work. Ive done a few myself. Ive been running those .150 shafts and couplers and havent lost anything yet. Get a good solder bond on it and check it regularly for anything going wrong and you will be fine. You can also put a wheel collar on the flex shaft between the motor and stuffing tube to prevent a loss if your coupler breaks loose. I dont think it could get passed the rudder though.Comment
Comment