Mystic C5000 M

[vvviivvv]

you seriously don't need a 40.300...... unless you plan on running some lehner 3060/3080 any time soon or some really big Neu's the controllers i would buy are the 32.200WK or if you dont need them anytime soon you could try the new AS26-170Bl which wont be available to mid February at soonest.. http://www.rc-raceboats-world.de/xos...gler-c-2_12_30


Edit: - Where did you find the Schulze 40.300 for 1000+ $? there 'only' 835 on icare-rc.com

[Gerwin Brommer]

As a matter of fact, the new AS26-1.. has been tested more, and will be sold as 200A esc !
299 Euro's.

[vvviivvv]

As a matter of fact, the new AS26-1.. has been tested more, and will be sold as 200A esc !
299 Euro's.

im thinking about ordering another as26-150 to match my original since i cant find one going second hand anywhere guess ill wait till February

[Tuslow1]

I was told that the 1527/1D's on 4s with a X447 would pull about 160 amps with that size hull and I intend to go 5s to 6s with that setup for insane speed and maybe even bigger props. Now I've heard that because the CC 240 says 6s " Don't You Believe It!!! " they might pop as quick as you can pull the trigger, So a 150 or 200 amp esc is already out tasked. You figure it is a big hull and she is going to have some weight to her, and you can bet your bottom dollar that she will be doing plenty of power launches (water wheelies) in my hands.
No offence but she is going in the 100mph range and I can't let all of the guys accross the pond have all of the fun with the big numbers, I want some too!!!

[Tuslow1]

Where did you find the Schulze 40.300 for 1000+ $? there 'only' 835 on icare-rc.com

On there website the funny looking E does satnd for Euros, don't it
The Currency Converter says 739.00 € = $1,059.50

[vvviivvv]

i don't know how it works but because of the EU they hike the prices up...? any country it is exported too its cheaper? i cant remember 100% but its something like that

[Anbjorn]

i don't know how it works but because of the EU they hike the prices up...? any country it is exported too its cheaper? i cant remember 100% but its something like that

Inside EU they have to add the 19% VAT.
So selling them out side of EU make them minimum 19% cheaper.

[Tuslow1]

Well gents looks like bringing my mystic hull in the house will be a piece of cake. Wife went into the garage today to hide the kids X-mas bikes and looked right at my mystic hull ( my heart was racing ) and didn't say a word... I was thinking she seen it but she didn't see it because it is also 13 other boats on the shelves and since she hates them all, they all look the same to her. Then she was checking over the bank accounts online and asked "Did I buy something from a MHZ for $180 with the debit card?" I took a deep breathe and told her "yeah, more small parts for boats... all together it will be about $700 but I will do it in 3 parts over the next month." She said " ok, just don't get carried away with that crap again"
YES, YES, YES!!! There is a God my friends!!!
Let me explain? About 4 years ago I bought a $4000 60" Bonzi Gas Cat, now I did it on my credit card and she knew nothing about it but while looking for something or another she found the Bonzi invoice PIF and the $h!t hit the fan. Needless to say she took all of my credit cards and left me with a Debit card thats just for me to eat with and or get semi-truck repairs with. I pay myself $300 a week to handle my rc habit and everybody who deals with me knows I'm very creative in getting vendors money for what I want. BTW, my Mystic hull was ordered on a friends credit card... It's ok, you can laugh at me because at times I am a clown!!!

[wetsleeves]

Mate, your being really creative and I cant stop laughing.......
Your one step ahead, but just be careful.....you know what the female species is like.
On the other hand my misses has said to me that I can purchase my Jetcat turbines for my large mystic but Im finding it hard to part with my hard earned money.........

[Gerwin Brommer]

Let your wife transfer the money.........haha

[wetsleeves]

now thats a thought........

[Tuslow1]

She just did a paypal to someone for me for a used boat ( I have no clue what the password is ) and I had to answer 20 questions to get her to do it, and it was like pulling teeth!
Trust me guys, it is all my fault that she is the way she is. I blow money like a suicide bomber!!! I simply run into a hobbyshop and

[uncledirty]

^ I have said about expensive hobbies, that its better than drinking the money which would be quite realistic option if one is left without any hobbies.

[Tuslow1]

I got the new motormounts in and they fit like a glove in the sponsons may need a tiny bit of shaping to get them in perfect but all of the CNC parts look awesome! The small lip on the front of Neu motors fit perfect in the mounts. This by far sould not be a tough build at all. Kinda like putting a jigsaw puzzle together! I only have one 1527/1D and I ordered it with a 5mm shaft, but the ones I get from OSE will be 8mm. And the more I think about it the more I'm going toward using the XXL 40.300 speed controls. If I get in trouble over this boat I might aswell make it worth the while!
Anybody know where I can find the ABSOLUTE BEST PRICE on the Schulze XXL 40.300???

[Gerwin Brommer]

that's a real waste of money ! Why not using 24.150's ????