BBY's HRP CC build It is going electric!

[KillerDave]

That is a mighty boat my friend! Mighty indeed!!!

[Gerwin Brommer]

What size cells are the RXbatteries ?

[RandyatBBY]

What size cells are the RXbatteries ?

5 cell NiMh 1600mah

[Gerwin Brommer]

Holy crap !!
They are supposed to feed 2 large esc's AND 2 1/4 scale servo's ??
I would go for a 2S 5000 mah LIPO.

[RandyatBBY]

Holy crap !!
They are supposed to feed 2 large esc's AND 2 1/4 scale servo's ??
I would go for a 2S 5000 mah LIPO.

You have done more of these than me, But I have never needed more on the smaller twins we have run. They are only little boats compaired to this HRP those big cells we have. Lets look at the servos for a little while

We had planned on using either

http://www.hitecrcd.com/servos/show?name=HS-755HB

or this one

http://www.hitecrcd.com/servos/show?name=HS-645MG

[ace028]

Superb job randy, i'll be watching this one closely!

[smoke]

Randy you are the man !!! Thx for hooking this up for me

[RandyatBBY]

First day of work on this thing. Sure look sweet in my mess

[tth]

Beautiful stuff you doing there. You are an artist at your craft.

BTW I second Gerwin's suggestion. Its something you really should consider.

[Gerwin Brommer]

A few gramms more or less don't really matter. You can even consider
4300 Mah Sub-c 's.
Btw : are you gonna add extra caps to the esc's ?

[RandyatBBY]

A few gramms more or less don't really matter. You can even consider
4300 Mah Sub-c 's.
Btw : are you gonna add extra caps to the esc's ?

I could I have built them before, but I was going to start with X457 props R and L then go to X463 R and L

[RandyatBBY]

Beautiful stuff you doing there. You are an artist at your craft.

BTW I second Gerwin's suggestion. Its something you really should consider.

We have all ready ordered the 755's servos. and a bigger reciever pack is eazy.

[Gerwin Brommer]

As the servo's are not digital, you ain't gonna use 2,4 Gig ?

[6S HYDRO]

Dont have to have digi servo's to run 2.4

[Gerwin Brommer]

Okay.