I am really wondering how all this equipment is going to fit in the hull and not make it sink! The water jackets on the 1527's are going to be a tight fit. I think I may have to make my own motor mounts...
-
-
You can get pre-cut C/F motor mounting plates and servo mounts together with the transom doublers for your HPR from AE-Carbontec. Email Andreas. He is a good guy to deal with. I bought my parts for my first HPR06 from him.
Originally posted by malibu1 View PostHPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:
Comment
-
mounting holes are probs diff, there's + hanspeters are designed around the 19"" series lehner motors so i was told... mounting my motors tomorro both of the drivers are now attached. orderd a eagletree with gps and some thunder power g4 30 / 60 c batts didn't want to chance china lipos
Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holderComment
-
Nope! I have AE-Carbontec's motor mount and I had my Neu 1521's mounted in my HPR.
Originally posted by vvviivvv View Postmounting holes are probs diff, there's + hanspeters are designed around the 19"" series lehner motors so i was told... mounting my motors tomorro both of the drivers are now attached. orderd a eagletree with gps and some thunder power g4 30 / 60 c batts didn't want to chance china liposHPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:Comment
-
1521 and 1527 have same mounting holes so maybe its length wise? since u have to kinda angle them to get the drives to line up...?Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holderComment
-
The 1527 are a longer can than the 1521's. But there is lots of room to mount either one. The motor mount plate has to be angled down and inboard toward the stuff tube. I would suggest finding a solid aluminum rod to help position the motor plates. Mock setup the motor,collet and alum. rod and the stuff tube. I would then permanently epoxy the stuff tube into position first, before the motor plate.
Originally posted by vvviivvv View PostHPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:Comment
-
I have the motormounts from AE-Carbontec and also the motor mounts from HP. HP said his mounts are for the Lehner motors. I can put the HP & AE mounts next to each other and they are identical. I am almost positive they come from the same CNC machine. Mounting holes match the 1527's perfectly. Its just going to be a tight fit using these mounts, pointed inboard and down and have the water jackets on them. Tight, but I think it may just fit. Have not done a mach-up yet.Comment
-
actually, are either of you thinking about sanding the tops of the mounts a little bit because mine push the deck up in the area im mounting them...Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holderComment
-
Are you running counter rotating props or both the same way??
Im going to run Neu 1518 on 5S so i can race in the 10S class here in Australia.
What speeds do you expect from your 1521 and 1527 setups?????STUFF NITRO GO LIPO
FASTELECTRICS.COM
OFF-SHORE-ELECTRICS.COM
INVENTOR OF LITHIUM CELLS:bowdowComment
-
about 80 - 85 on 6s maybe 95 on 7s? i aint 100% but i got some meaty props
with a 1521 1YHpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holderComment
-
V, I will need to re-shape the motor mounts a little bit. Also, the transom doublers need to be re-shaped for a perfect fit. I may trace out some new ones once I get some C/F.
I am not sure what kind of speeds mine will run. I am going to run 6S to start. Not sure on props yet. Was thinking X442 & X442R.Comment
-
Originally posted by malibu1 View Post
made my own doublers too
u will need atleast x447 with 1527's o.o probs 52mm...Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holderComment
-
When you say 80-85 , You mean M.P.H ???STUFF NITRO GO LIPO FASTELECTRICS.COM
OFF-SHORE-ELECTRICS.COM
INVENTOR OF LITHIUM CELLS:bowdowComment
-
vvvviivvv and malibu1, are you guys getting stingy with pics?OK, You Go First!!!
Comment
they been clocked at 128mph...
Comment