TFL Hobbies "Popeye" Hydro

[ron1950]

I know u guys don't run were I do (south fla) but there are some wooden whips down there that abslutly smoked my fe 30 and I am running upper 40's..they must be running 53 or 54 at least as I never took my finger off the throttle at all and came in third by a ways back,.

[ron1950]

what holds the prop on? never had one like that without prop nut

[Doby]

There is a bullet nut with a set screw....I have been using a piece of silicone tubing.....

[ron1950]

i just ordered a .187 flex for this boat prob will trash that set screw system

[kacordy]

Is anyone running one of these on the Left Coast yet? California? What do they cost?


Thanks, Allen

[LALIZZLE]

Is anyone running one of these on the Left Coast yet? California? What do they cost?


Thanks, Allen

I have one but I'm in AZ contact Monica here on the form she will be glad to help with your purchase.

[ron1950]

don't be in a hurry to hear from her as china has a week long holiday till about oct 10 or so

[LiPo Power]

Could you please post link to the one you have ordered?

i just ordered a .187 flex for this boat prob will trash that set screw system

[ron1950]

well I ordered this in 20 in size will cut to fit....may have to make a new stuffing tube about a inch longer haven't got the boat yet to look it over....http://www.offshoreelectrics.com/pro...?prod=ose-1190

[ray schrauwen]

What colour is the botom?
Are you happy with the finish and were you able to run it yet?

Looks nice & stable in the vids. Fills me with confidence.
I'd been interested in the hull for quite some time & after discussions with May from TFL I ordered one last month.
I'm glad to say that Monica sent me an email today saying that it has been posted. Unfortunately May has recently left the company.

I had ordered the 'green' version, & they had to manufacture it for me as it wasn't in production at the time. I ordered it without ESC, Motor or prop. But I also ordered one of the TFL 4082 2200kv motors to drop into it. May, Monica & TFL are very accommodating.
Can't wait for it to arrive.

Here she is ready to post.

[tlandauer]

Ray, I am leaning towards the green one, but the blue/yellow is nice too. I like the two-tone scheme on the dome compared to the mono silver tone on the green one.
Think I will pull the trigger in the next day or two. Too good to resist! I wonder if the stickers are covered with clear coat or not. Monica asked me if I want just the plain green or with stickers, that's why I think they are not under clear. I will have to ask her again. She also asked me about the shaft, I don't quite understand what she meant by that...does it mean that we have a choice to have a one-piece shaft vs. the two piece square cable type?
I will post back when I get more answers from her.

[tlandauer]

I have a question for you guys, should I get the "standard" two-piece shaft or the one-piece "welded" shaft ( "welded" as per TFL terminology) that is commonly seen here?
I have a choice as it turns out.
Thanks for the advice!

[Monica Smith]

GREEN POPEYE.jpg

What colour is the botom?
Are you happy with the finish and were you able to run it yet?

Hi Ray, here is the bottom as same as Paul's Green/ Silver Popeye.

[785boats]

Ray.
Yep. Green as Monica has shown.
We ran it the last couple of weekends & am very impressed. Even with a home made turn fin. Runs well & turns extremely well. Ran it in some really heavy wind & chop & she was really stable.

tlandauer.
If you have the choice, get the welded 3/16" shaft. That's how mine came & it is so much better than the two piece set up. I had been discussing the merits of the welded shaft with May from TFL before I ordered mine. They are quick to put suggestions into action.

Monica.
I see in your avatar that the Arrow is in production. Any info on the production of the 'Fireball' yet. I still need one.

[ray schrauwen]

Thank you Monica, I received your link to better pictures. I'm still deciding on what decals I want under the clear.

The silver top one looks like it's modeled after the "Trainer" aka lil' Miss "Block and Head" I'm just not sure if I want the decal Popeye right on the boat or separate after I find more pictures of the real boat.