nicked up Delta 33

[Steven Vaccaro]

This hull has some cosmetic nicks. And a chip taken out of the cowl from dropping the cowl(see picture on OSE). Most scratches came from it being pushed around the shop. but otherwise it would make a nice boat to race with.

This will be sold to the first person who checks out of the OSE products site with it.




http://www.offshoreelectrics.com/pro...od=clr-delta33

[Shovelnoserc]

I received it last week. Almost done installing my old Revolt 30 Hardware except trim tabs. The Revolt met a nice set of rocks and I was not looking forward to repairing it and adding weight.

So far I like the Delta Hull. It's very light compared to the Revolt 30. Looking forward to running it.

Right now a little under powered as it will just have a 2030kv motor and Aquacraft esc, but I've been reading a few posts and It looks like a Leopard 4074 or 4082 2000ish kv sticking to 4s and either a seaking or swordfish esc. Inclined towards the swordfish due to the features I've read it has.

Thanks for the deal Steve

[Steven Vaccaro]

Glad it's working out. Be careful with the 2030 in that boat. I ran one for a while. It ran nice, with cool temps and cool water. but but I cooked it when I ran for to long with a high mah pack and didn't think about the ooutside temps of 90degrees.