Littlescreamers 63mmwater jacketed Motor

[Doby]

Thanks!

[wolf IV]

well i may have to try one on 12's in my bud as i only have 4s packs lying around here.... what size prop are we talking on 12s in the 1/8 pro boat?

[6S HYDRO]

Yes. RC Polly 5S1P 5000Mah 30C X4

RANDY PLEASE BRING THIS BOAT FOR THE WINTER WARMUPS, I WOULD LOVE TO SEE THIS THING RIP AN EXHIBITION RUN. PLUS I WANNA SEE THE GAS GUYS JAWS DROP

[RandyatBBY]

I posted this under the Pro boat build but for any one not looking there hear it is too.

[RandyatBBY]

RANDY PLEASE BRING THIS BOAT FOR THE WINTER WARMUPS, I WOULD LOVE TO SEE THIS THING RIP AN EXHIBITION RUN. PLUS I WANNA SEE THE GAS GUYS JAWS DROP

Have you shown then this?

http://www.youtube.com/watch?v=Cbf1RCgziDg

[6S HYDRO]

they're the type that have to see it in person to believe

[Doby]

I got mine last week, installed it in my 42" Cat:

A few observations:
1) Big motor thats not too heay compared to some of my big inrunners I have.

2) Very large power wires (nice)

3) Poor solderability on these wires (not nice). It took a lot of the most corrosive flux I had and cleaning of the wires with a steel brush to make a decent conection .

4) Lots of torque when powered up compared to an inrunner, my cat (on its stand) started slowly moving across my workbench when I was messing around with the throttle.

5) Probably as a result of the torque, it takes a looooong time for the prop to stop spinning when I get off the throttle.

6) No nipples installed for the water cooling, I had an old SV27 controller and canabalized the ones off of that to used on the motor, had to have the holes on the motor enlarged slightly and tapped. Would be nice if they came installed. When you buy a water jacket for your inrunner, they have them installed, but not on this motor??

I'll post some pics later,,,,water trials are still about a month off (hopefully)

Overall, a nice piece of hardware.

[Steven Vaccaro]

I
6) No nipples installed for the water cooling, I had an old SV27 controller and canabalized the ones off of that to used on the motor, had to have the holes on the motor enlarged slightly and tapped. Would be nice if they came installed. When you buy a water jacket for your inrunner, they have them installed, but not on this motor??

Doby you recieved one of the first few from Jim. OSE is now packing them with 638 glue and 90 degree fittings for the jackets so the customer can install them in any direction thats needed.

[sailr]

Steven, I can't find 638 glue on your site? Found the 90's but not the glue.

Doby you recieved one of the first few from Jim. OSE is now packing them with 638 glue and 90 degree fittings for the jackets so the customer can install them in any direction thats needed.

[Doby]

Doby you recieved one of the first few from Jim. OSE is now packing them with 638 glue and 90 degree fittings for the jackets so the customer can install them in any direction thats needed.

Thats great to know Steve.

Maybe next time, I won't be so "premature" ............with my orders.

[Steven Vaccaro]

Steven, I can't find 638 glue on your site? Found the 90's but not the glue.

I dont sell the 638, I include a small ziplock bag of it with the motors.

[Steven Vaccaro]

Thats great to know Steve.

Maybe next time, I won't be so "premature" ............with my orders.

It sounds like you figured out a good way of getting it done. Happy Ending of sorts. Now finds some moving water and get it tested!

[sailr]

Is it a type of loctite or epoxy or? Brand name? For those of us who will buy your 90 degree fittings and need a glue to hold 'em good!

I dont sell the 638, I include a small ziplock bag of it with the motors.

[axel]

I think Steven is talking about Loctite

Axel

[Steven Vaccaro]

I think Steven is talking about Loctite

Axel

thanks.

Its loctite 638. But there are others that can be used. Like 603.