Tenshock motors

[sailr]

Totally agree Peter. That's why we are not selling them. The Europeans, on the other hand, consider them to be a bargain. Go figure, eh? THEY don't have NEU motors over there so don't know any better. Haha. The first one that runs a NEU will be yelling HOLY CRAP!

There is some real quality stuff starting to come out of china , just not big on paying $200+ for a 36mm motor

[Gerwin Brommer]

STOP ! there ARE Europeans running Neu's !!!
Getting a pair of tenshocks from china still is cheaper for us then buying neu's from the States.

[RCprince]

Totally agree Peter. That's why we are not selling them. The Europeans, on the other hand, consider them to be a bargain. Go figure, eh? THEY don't have NEU motors over there so don't know any better. Haha. The first one that runs a NEU will be yelling HOLY CRAP!

http://www.neumotors.com/Site/Boat_motors.html "Achim Kurrecks ran his HPR 135 cat for the first time on a nice and wide lake. He ran a twin setup of your 2215/1Y on 10s1p LiPo each. "

[sailr]

Interesting. I'm sure you must know who David Nieuwland is, from Belgium? He tells me he has never seen a NEU motor. But then he runs pure competition all over Europe. Perhaps the Europeans using NEU motors are just sport boaters?

STOP ! there ARE Europeans running Neu's !!!
Getting a pair of tenshocks from china still is cheaper for us then buying neu's from the States.

[Gerwin Brommer]

You know what they say about Belgians ?

Almost all Belgian racers use tenshock, and lifepo's !!!!
More and more germans get interested in Neu's.
You now even find Neu's to be sold in the German board.

[Punisher 67]

I just sold 4 mounts that fit a 2230 , 2215 , 1527 , and a 1521 to a very nice fellow in Norway.......Joern Markset . I think Neu's are starting to take off over there also

[NativePaul]

David may not have seen a Neu but I know he competed against one that was tucked inside a mono1 at the UK nationals when he came over last year.

[sailr]

I figure it's only a matter of time that NEU will dominate in Europe. I keep telling David that he needs to become the European distributor for them.

[Gerwin Brommer]

We cab buy Neu's in Germany.
But their assorti is airplane orientated.

[norbique]

can you post the link Gerwin? Thanks!

[Gerwin Brommer]

Excuse, it's Swiss now

http://www.eflight.ch/shop/USER_ARTIKEL_HANDLING_AUFRUF.php?darstellen=1&Kategorie_ID=305&PEPPERSESS=a94027546b8673a4fccfd0d1fe1cb68b&kat_last=305&grp_aktiv=&kat_aktiv=305

The Germans seem to have stopped selling

[sailr]

Prices are not that bad either!

[larryrose11]

So, from my understanding, th unloaded motor RPM is somthing like battery voltage*KV right?
Given this chart

For the 21 turn motor, with a KV=2600, it list max voltage of 32V!!
If im right in my previous assumption...

32*2600 = 83,200 RPM!!!!

Could the possibly be right?
They do call out special bearings as part of he build, but really?
Could his be why they are expensive?

[sailr]

That chart is old. The viper line is replacing these. The chart is for the little 20mm motors. I doubt they can handle 82K RPM though. Note is says max watts 500 and max volts 25amps 25. That means a max of 20 volts! Volts x amps = watts.

[sailr]

We will be testing one of the new Viper motors soon. If all goes well, we will sell them in the U.S.A.