neu 1527 1.5y and a neu 1521 1.5d 8mm shaft

[meangenesracing]

Hello, looking for a good deal on both, anyone

[ray schrauwen]

I have 1521 1.5D. I'm not back home until after Christmas. Might make a trip back next week but only if very necessary.

It's clean and I ran it once in Michigan in 2014 for p mono. Bought it on the swap shop about the winter before.

Keep me in mind if you aren't in a rush or don't find one in USA.

[meangenesracing]

I have 1521 1.5D. I'm not back home until after Christmas. Might make a trip back next week but only if very necessary.

It's clean and I ran it once in Michigan in 2014 for p mono. Bought it on the swap shop about the winter before.

Keep me in mind if you aren't in a rush or don't find one in USA.

Ray, will do, how much you want for it? is it a 8mm shaft? thanks

[ray schrauwen]

Yes, 8mm shaft and asking $130us shipped.

[meangenesracing]

Yes, 8mm shaft and asking $130us shipped.

when you get back home please post pictures of motor and as long as bearings are good I will most likely take it

[ray schrauwen]

Ok. Will do.

[Jesse J]

I'd like to be next in line for the 1527 1.5y If Meangene does not take it. Thx.

[meangenesracing]

I'd like to be next in line for the 1527 1.5y If Meangene does not take it. Thx.

the one offered by Ray is a 1521

[Jesse J]

Ok. I'll start my own thread. Didn't mean to jump your thread.
Jesse

[meangenesracing]

Ok. I'll start my own thread. Didn't mean to jump your thread.
Jesse

thats fine no problem

[ray schrauwen]

when you get back home please post pictures of motor and as long as bearings are good I will most likely take it

Here is the thread I bought the motor from Don Ferrete. Looks same as this. Uploading new picks asap. Paid $150us plus shipping.
https://forums.offshoreelectrics.com...highlight=1521

No cooler, needed for my other 1521. Plugs are HXT150s that I will remove since few run them.

Only one set of heats in p mono since I bought it.

[ray schrauwen]

Attempt1a10665353-52-IMG_20180117_102202.jpg

a10665354-146-IMG_20180119_202549.jpg

a10665355-15-IMG_20180119_202618.jpg

[meangenesracing]

Attempt1[ATTACH=CONFIG]156333[/ATTACH]

[ATTACH=CONFIG]156334[/ATTACH]

[ATTACH=CONFIG]156335[/ATTACH]

Ray, thats the old style motor correct ? do you know the build date? also whats the spacing on mounting holes in front? bolt size please. want to make sure it will work with my mount

[ray schrauwen]

4mm holes with 25mm spacing. If you read the link i posted it has as much info as I know. Don had Neu redo the motor. To me it looks like it has a new field. This motor has the lighter detent compared to the older ones. Date on motor is 10/6/08. No idea if it's month day year or vice versa. Anyway it's been refurbished at Neu more recently and if I knew it was this nice I wouldn't have asked only 130 for it.

That said if it's not for your needs I completely understand. Thank you.

[meangenesracing]

4mm holes with 25mm spacing. If you read the link i posted it has as much info as I know. Don had Neu redo the motor. To me it looks like it has a new field. This motor has the lighter detent compared to the older ones. Date on motor is 10/6/08. No idea if it's month day year or vice versa. Anyway it's been refurbished at Neu more recently and if I knew it was this nice I wouldn't have asked only 130 for it.

That said if it's not for your needs I completely understand. Thank you.

Ray, I think I can make this work with my mount if not I'll get a different mount. PM me your paypal and I will het you paid by Monday night if that works for you thanks, geno