Castle xlx

[jim82]

Selling my basically new xlx that is ready for water cooling ive already changed caps and put a couple coats of conformal on the control board. Only reason for selling is to fund a heli. $165.00 shipped conus will sell with brand new tubes of Arctic silver if needed for an extra $10.
20190205_210553.jpg
20190205_210607.jpg
20190205_210635.jpgsold

[Alanterry]

Jim is this the castle Mamba xlx that you pulled the air cooling parts off of??? Has it been powered up at all??? Do you have the program adapter???

[jim82]

Yes I stripped it so I could add water cooling but I didn't finish this one been messing with other rc stuff. It has been powered on everything is good to go but the cooling needs to be fixed. I can send some clear shrink with it as well if need be. I changed all caps to zlh

[Alanterry]

Selling my basically new xlx that is ready for water cooling ive already changed caps and put a couple coats of conformal on the control board. Only reason for selling is to fund a heli. $165.00 shipped conus will sell with brand new tubes of Arctic silver if needed for an extra $10.
[ATTACH=CONFIG]163760[/ATTACH]
[ATTACH=CONFIG]163761[/ATTACH]
[ATTACH=CONFIG]163762[/ATTACH]

I will take it for $160.00 shipped, I will PAY Pal as soon as you say it mine…..

[jim82]

sold

[dasboata]

Selling my basically new xlx that is ready for water cooling ive already changed caps and put a couple coats of conformal on the control board. Only reason for selling is to fund a heli. $165.00 shipped conus will sell with brand new tubes of Arctic silver if needed for an extra $10.
[ATTACH=CONFIG]163760[/ATTACH]
[ATTACH=CONFIG]163761[/ATTACH]
[ATTACH=CONFIG]163762[/ATTACH]sold

Jim what size caps do u put in there ? Plz !!!

[RaceMechaniX]

It looks like he put on Rubycon 35V ZLH caps instead of the Panasonic caps that normally come on the Castles.

[jim82]

Correct. I changed them all out

[maxxximatoze]

Do you know the reference of the mosfet used in the castle XLX (we can't see it on the photos) ? Thx !

[Alanterry]

This esc is the Castle Mamba XLX

[maxxximatoze]

This esc is the Castle Mamba XLX

OK, but do you know the mostfet reference used on the pcb of the XLX (the 48 little black plastic squares) ?

[Alanterry]

Here is what they say on them

OK, but do you know the mostfet reference used on the pcb of the XLX (the 48 little black plastic squares) ?

[maxxximatoze]

Thx a lot !!!

If it's a photo taken from the Castle XLX, then it seems that the mosfet used are still the same ref than in the XL2 and XL so it's been almost ten years with the same BSC019N04 mosfet (BSC019N04NS in XLX case)... see this https://www.rc-monster.com/forum/sho...&postcount=119 and this is the datasheet >> https://www.infineon.com/dgdl/Infine...16c45be78a0832