COMBO: 2x NEW LMT 2260/4 and 2x Schulze 40.160 "old school" fresh service

[ManuelW]

The Schulze 40.160K's have been upgraded with 6x6mm square brass tubes with just 0.3mm wall thickness and 5mm tubes soldered to each end, glued to the massive main PCB layer with Arctic Silver Thermal Adhesive for a better heat transfer than the soldered tubes of the 4mm tubes of the WK version for perfect cooling.

As written in the description WK has been added in a way to try to be better than the regular soldered solution. But doesnt matter as motors as well as ESC's are sold.

regards,
Manuel

[RaceMechaniX]

These are 40.160H's that have water cooling tubes added to make them WK's

[thisisabook]

40.160K not WK right ?

[ManuelW]

Looking for an ultimate setup?

I'm offering a brand new set of Lehner 2260/4 (8mm shaft/aircooling) together with a pair of the almost legendary Schulze 40.160K old school ESC's! Perfect choice for SAW cats from 40" to 53".

-2260/4 w. six connectors: 2466kv in delta/1425kv in wye

The Schulze 40.160K's have been upgraded with 6x6mm square brass tubes with just 0.3mm wall thickness and 5mm tubes soldered to each end, glued to the massive main PCB layer with Arctic Silver Thermal Adhesive for a better heat transfer than the soldered tubes of the 4mm tubes of the WK version for perfect cooling. The ESC's are one of the last ones to be ever serviced from Schulze including fresh water protection and additional caps.

If one also needs the appropriate hull let me know, got a rigged & 125mph tested catamaran here where this setup suits.

International shipping possible, same for payment via PayPal!

PRICE: 1950€ (Euro) - $2400 (USD)

Happy Easter,
Manuel

IMG_20180329_180412.jpgIMG_20180329_180423.jpgIMG_20180329_180452.jpgIMG_20180329_180506.jpgIMG_20180329_180545.jpg