Lehner 30xx motors

[Javasledge]

Hi all

I have a few Lehners for sale.

Lehner 3060/5 in star as 875k
Including watercooling, Lehner 10/6,35 coupler and Lehner 8mm female connectors
Used but in good shape USD 560,-

Lehner 3060/6 1167kv
New and from MGM mounted with 6mm connectors. It has been mounted but not in use
Original 8mm driveshaft, SOLD

Lehner 3040/7 1500KV or 875kv
Used but just returned from Lehner with new ballbearings
10mm driveshaft, USD 405,-

All plus dispatch.

Best regaards
Finn

hereby the pics of the 3040
IMG_7250.jpgIMG_7251.jpgIMG_7252.jpgIMG_7254.jpgIMG_7254.jpg

[Javasledge]

here is the 3060/6
IMG_7255.jpg IMG_7256.jpg IMG_7257.jpg IMG_7258.jpg

[Javasledge]

and finally the 3060/5 IMG_7303.jpgIMG_7304.jpgIMG_7305.jpgIMG_7307.jpgIMG_7302.jpg

[Leeandre]

The 3070 875kv can be used on 12s ?

[Javasledge]

The 3070 875kv can be used on 12s ?

Hi Leeandre, I assume you mean the 3040/7.

Yes it can be used on 12s. The 30xx motors can turn up to 50.000rpm according to Lehner.

br
Finn

[Leeandre]

I meant the 3060/5 ,sorry

[Leeandre]

I have a TP 5860 800kv in a 48 Cat and I have as high as 88mph ,considering this motor IF it could push me beyond that mark. Oh 12 s

[RaceMechaniX]

I meant the 3060/5 ,sorry

NO, don't run a 3060/5 on 12S. Thats over 550A and 51kRPM. You can reconnect to a Wye (Star) wind to lower the kV.

[Javasledge]

Hi Tyler, I agree it would kill the motor without connecting in star.

As shown on the pictures - the 3060/5 is connected in star:-)

br
Finn

[meangenesracing]

Do you need one of those overpriced MGM controllers to run these motors?

[photohoward1]

Do you need one of those overpriced MGM controllers to run these motors?

No you don't but you will need a hi-amp controller. I have used fliers and Swordfish successfully.

[meangenesracing]

No you don't but you will ne a hi-amp controller. I have use fliers and Swordfish successfully.

Do you know how the 850 kv motor would perform in a assault racing design ambush 57 ". using a etti 220 controller

[Javasledge]

@meangenesracing I ran the motor in a 48" mono on 10s with a octura x460/3 prop and it was cold. Here is a video, running +-60mph https://www.rcgalleri.dk/video/diver...inns_virus_100


I'm by the way using a Flier400amp controller and I would recomend an ESC with a higher limit than the etti 220 - but maybe somebody else has experience with the etti controller?

br
Finn

[Javasledge]

Still for sale, I'm open for offers

Br Finn

[Javasledge]

The motors are still for sale and I’m open for offers.

Br
Finn