8 Neu Motors for sale! 1515's, 1518's, 1521's and 1527's

[RaceMechaniX]

***ALL SOLD***



Guys,
I am no longer using any of these motor so they are up for grabs. All the motors are in very good to new condition. All had connectors soldered on and removed. I will explain the condition of each motor in a new post with pics. If you want one or all, say so in a thread by posting. "I will take 15XX motor". Shipping is included in the price and I will give a small break if you buy multiple motors. I prefer to ship USPS, unless you say so. Most come in their original box or at minimum another Neu motor box.

1. Neu 1515/1.5D/S/5mm/2700kv built 2/22/2012 Slightly used in excellent condition. $125 shipped
2. Neu 1518/1.5D/S/5mm/2340Kv built 2/29/2012 Brand New, special order wind. $150 shipped Sold to dethow
3. Neu 1521/0.5Y/S/8mm/3100Kv built 3/30/2012 Brand new, connectors were soldered on, now removed. $160 shipped Sold
4. Neu 1521/1D/S/8mm/2900Kv Early style motor, excellent condition. $160 shipped
5. Neu 1521/1Y/S/8mm/1577kv built 10/17/2011, brand new. $160 shipped. Sale Pending to Antonio.
6. Neu 1527/1Y/S/8mm/1250Kv built 8/26/2011, Brand new, short motor leads. $175 shipped. Sold to John B.
7. Neu 1527/0.75Y/S/8mm/1640Kv built 11/19/2015, 11/19/2015. Brand New. $175 shipped. Sold to Hi8is
8. Neu 1527/1D/S/8mm/2300Kv built 10/13/2011. Excellent mechanical condition, some stagnant water damage on sleeve. $175 shipped. Sold to Neil S.
9. Neu 1527/0.5Y/S/8mm/2500kV unknown build date, very good condition. $175 shipped. Sale Pending to Antonio.

IMG_6214.jpg

Remember to follow the rules and post questions here, no PM's.
Posted on other sites as well.

Tyler

[RaceMechaniX]

1. Neu 1515/1.5D/S/5mm/2700kv built 2/22/2012 Slightly used in excellent condition. $125 shipped
Motor was used for several runs. Shaft was shortened and fiberglass sleeve added near end bell.
Alloy screws to replace the small set screws in the end housing.

IMG_6188.jpgIMG_6189.jpgIMG_6190.jpgIMG_6191.jpg

[RaceMechaniX]

2. Neu 1518/1.5D/S/5mm/2340Kv built 2/29/2012 Brand New, special order wind. $150 shipped

IMG_6198.jpgIMG_6199.jpgIMG_6196.jpgIMG_6197.jpg

[RaceMechaniX]

3. Neu 1521/0.5Y/S/8mm/3100Kv built 3/30/2012 Brand new, connectors were soldered on, now removed. $160 shipped
Fiberglass sleeve added to the motor wires to protect it going through the end bell. Solid copper wire on motor ends to build up diameter for larger bullets.

IMG_6200.jpgIMG_6201.jpgIMG_6202.jpgIMG_6203.jpg

[RaceMechaniX]

4. Neu 1521/1D/S/8mm/2900Kv Early style motor, excellent condition. $160 shipped
Earlier style motor with the pinned front end bell, used for P mono heat racing for several heats. I went back to the 1.5D.

IMG_6184.jpgIMG_6185.jpgIMG_6186.jpgIMG_6187.jpg

[RaceMechaniX]

5. Neu 1521/1Y/S/8mm/1577kv built 10/17/2011, brand new.
It was mounted as a mock-up motor, but never ran. Additional heat shrink added where wires pass through end bell.

IMG_6177.jpgIMG_6176.jpgIMG_6178.jpgIMG_6179.jpg

[RaceMechaniX]

6. Neu 1527/1Y/S/8mm/1250Kv built 8/26/2011, Brand new, short motor leads. $175 shipped.
Motor leads were shortened.

IMG_6192.jpgIMG_6193.jpgIMG_6194.jpgIMG_6195.jpg

[RaceMechaniX]

7. Neu 1527/0.75Y/S/8mm/1640Kv built 11/19/2015, 11/19/2015. Brand New. $175 shipped.
Solid copper wire added to motor leads to build up diameter.

IMG_6209.jpgIMG_6210.jpgIMG_6211.jpgIMG_6212.jpg

[RaceMechaniX]

8. Neu 1527/1D/S/8mm/2300Kv built 10/13/2011. Excellent mechanical condition, some stagnant water damage on sleeve. $175 shipped.
Mechanically in excellent shape, however lake water was allowed to sit in sleeve which eroded some of the black coating on the outer diameter.

IMG_6204.jpgIMG_6205.jpgIMG_6206.jpgIMG_6207.jpgIMG_6208.jpg

[RaceMechaniX]

9. Neu 1527/0.5Y/S/8mm/2500kV unknown build date, very good condition. $175 shipped.
Fiberglass added where wire pass through end bell to protect wires. Motor was purchased used, but is in very good condition.

IMG_6181.jpgIMG_6182.jpgIMG_6180.jpgIMG_6183.jpg

[dethow]

I will take:
2. Neu 1518/1.5D/S/5mm/2340Kv for $150 shipped

Send me over your PP info and I'll get you settled up. Thank you

[RaceMechaniX]

I will take:
2. Neu 1518/1.5D/S/5mm/2340Kv for $150 shipped

Send me over your PP info and I'll get you settled up. Thank you

Got it, PM headed your way.

[dethow]

Got it, PM headed your way.

Funds have been sent. Thank you

[RaceMechaniX]

Funds received.
Thx

[TRUCKPULL]

5. Neu 1521/1Y/S/8mm/1577kv built 10/17/2011, brand new.
It was mounted as a mock-up motor, but never ran. Additional heat shrink added where wires pass through end bell.

[ATTACH=CONFIG]151665[/ATTACH][ATTACH=CONFIG]151664[/ATTACH][ATTACH=CONFIG]151666[/ATTACH][ATTACH=CONFIG]151667[/ATTACH]

Price?

Larry