$500 for all items paid by Pay Pal + Actual UPS shipping & packaging fees- or local pickup. I will meet within 100 miles of Toledo OH also for this asking price. New post to clean up the mess- looking to sell as a lot only at these reduced prices. These items are also for sale at another site individually and if something should sell I will revise this main post and adjust pricing.
Osprey
This was a prebuilt then stripped down. Does have a few spider cracks on it nothing bad. There is a little deformation where the epoxy heated up hull on bottom from factory where the wood touches (picutre of my hand hovering over area). I was going to sand it smooth prime & paint. Comes with stock rudder, tabs, fins and all hardware shown in picture. Replaced stinger with Speedmaster 1/4" (brand new). Hull already drilled for it.
I did the carbon/kevlar inlay. My first experience with the kevlar (and last). Some areas lifted a bit but all the critical areas seems to be down and secure.
Hobby King 5692 1320kv & HRC waterjacket. Both brand new never used. Has 8mm bullets to hook into ESC.
Pursuit:
32" pursuit hull- white
Rudder- 130mm length. OSE-80050. It appears to be what normally comes on the pursuit.
Stinger- 3/16" 78mm long. This came from Fightercat and again appears to come on the pursuits.
Motor Mount: Carbon fiber 4-bolt 2-point mount
Driveline- .187" flex.
Motor: TP Power "4074" like size 2200kv
Bling Rocket
2868 X Power 2989Kv motor
HK cheap orange servo
120A Seaking
Proboat outdrive
Props:
CNC cut aluminum from TP Power:
(3) pcs 45 x 1.4
46 x 1.4
47.4 x 1.4
48 x 1.4
38 x 1.4
39 x 1.4
TFL 1450 (JAE sharpened/balanced)
M445 sb&P
M445 sb&p
X437/3 sb&p
Misc plastic props
PLEASE NOTE:
Osprey has many new parts. Motor, ESC, stinger, flex.. all new. Only used items is hull, rudder and trim tabs.
Pursuit basically new. Motor is new. Seaking 180 is tore down for a waterblock mod I was going to do. I lost a motor plug due to a desolder. I would say "as-is" on the seaking 180A esc...
Bling Rocket had maybe two runs on it.
Osprey
This was a prebuilt then stripped down. Does have a few spider cracks on it nothing bad. There is a little deformation where the epoxy heated up hull on bottom from factory where the wood touches (picutre of my hand hovering over area). I was going to sand it smooth prime & paint. Comes with stock rudder, tabs, fins and all hardware shown in picture. Replaced stinger with Speedmaster 1/4" (brand new). Hull already drilled for it.
I did the carbon/kevlar inlay. My first experience with the kevlar (and last). Some areas lifted a bit but all the critical areas seems to be down and secure.
Hobby King 5692 1320kv & HRC waterjacket. Both brand new never used. Has 8mm bullets to hook into ESC.
Pursuit:
32" pursuit hull- white
Rudder- 130mm length. OSE-80050. It appears to be what normally comes on the pursuit.
Stinger- 3/16" 78mm long. This came from Fightercat and again appears to come on the pursuits.
Motor Mount: Carbon fiber 4-bolt 2-point mount
Driveline- .187" flex.
Motor: TP Power "4074" like size 2200kv
Bling Rocket
2868 X Power 2989Kv motor
HK cheap orange servo
120A Seaking
Proboat outdrive
Props:
CNC cut aluminum from TP Power:
(3) pcs 45 x 1.4
46 x 1.4
47.4 x 1.4
48 x 1.4
38 x 1.4
39 x 1.4
TFL 1450 (JAE sharpened/balanced)
M445 sb&P
M445 sb&p
X437/3 sb&p
Misc plastic props
PLEASE NOTE:
Osprey has many new parts. Motor, ESC, stinger, flex.. all new. Only used items is hull, rudder and trim tabs.
Pursuit basically new. Motor is new. Seaking 180 is tore down for a waterblock mod I was going to do. I lost a motor plug due to a desolder. I would say "as-is" on the seaking 180A esc...
Bling Rocket had maybe two runs on it.
Comment