MHZ Racemaster Hull Carbon/kevlar with carbon overlay MTC hardware BEAUTIFUL!!!

[JMSCARD]

Sold sold and sold

Here is a boat I bought, and being I'm a cat guy at heart, going to sell it...these are 39" long boats without hardware... long skinny and super stable at super speed :) its been run twice from what seller stated and the build thread is here... this sale includes a brand new flexshaft, and the stuffing tube was altered after original build but done right, and done so it didn't make a mark in the original build... very very very nice clean build, the carbon inlay is done very very well also... has lehner 22"" series motor mount, comes with servo mount, motor mount... and even the custom aluminum servo arm, has all MTC hardware except the standard turn fins... carbon servo rod with alloy ends... If you want a high end mono with all high end gear its here. This boat has a very nice custom paint job, and nicely done hatch bolts... someone will enjoy this setup.... this boat is a stunner.

Original owners build thread

http://forums.offshoreelectrics.com/...aster-SINISTER

$sold plus shipping to your destination... estimate $35 east coast $50 west coast... I will get exact ship costs to those interested.[ATTACH]undefined[/ATTACH]

PROP IN PICS IS NOT INCLUDED.... everything in pics is except prop lol flex goes all the way in... just threw it in with a prop on it for display lol.

[JMSCARD]

20160524_150748.jpg20160524_150716.jpg20160524_150815.jpg20160524_151004.jpg20160524_151241.jpg

[Leeandre]

I am very interested ,how much would the correct motor cost me and what esc would I need to run it on 6s

[JMSCARD]

I am very interested ,how much would the correct motor cost me and what esc would I need to run it on 6s

You have three options motor wise with the 30mm motor bolt spacing...

ANY 2240 2250 2260 or 2280 lehner = $350 or more depending on which you select

2. A 30mm spacing outrunner... the 4035 scorpions come to mind but no 6s winds

3. A KB45 Hobbyking motor is actually the same size diameter as the lehners.... I know of a new in box KB45 1600kv XL motor on RCgroups that would be perfect for 6s and its a whole $42 NEW IN BOX lol... 44mm can diameter x 65mm long...

A t180 is a good 6s esc that will work just fine... I have an original V2 T180 with the two cooling lines that I would sell for another $95 with the boat... not selling it separately but to the buyer would add it for $89 more... its THE t180 we all miss and wish they still make... has all of a few runs on it.... and is the last of the old two cooling tube t180's as its the V2 with the cap bank... perfect shape.

[Roy Van De Sande]

Nice boat :)

[JMSCARD]

I know of a 2260 1377kv on rcg for $375 low use from seller electric on rcg if wanting the fancy lehner route..

[Leeandre]

That's pretty hot but if we went with option above the affordable one whar kind is speeds would you expect. I am really interested in this boat ,I have a lot of boats and one of my favorite is the ToysPort triton with a 1717 castle and a 180 seaking ,it really fast and easy . I mean I have from that size up to 57 inch cats and everything in between. The motor you mentioned power wise ,does it compare to a TP 4070. Oh and if I do take it I will want it rtr and I will pay the difference. Thanks , oh btw my name is Lee .

[JMSCARD]

This one is easy... i only offer the esc as an add on, it needs servo and motor then and the time to install the gear... i dont have much time as way to many other rc items are taking my little spare time i have... want it gone ylu buying the motor esc and servos and simple 1 hr install and youll be on the water... this is a very unique boat... much much longer then the toysport and awesome straight line rocket of a mono :)

[JMSCARD]

The kb45 is a beast but needs cooling... it would be plenty fast these skinny long monos are pretty reasonable to push through the water... x447 and the 1600kb should be in 60 land.. maybe more but the lehner 2260 would make it very very fast ...hard to estimate but my last racemaster i actually ran had a neu 1521 ... never gpsd but had to be 65.

[Leeandre]

I was on hobby King and I can't seem to find the said kv 45 motor and when you said it will need cooling did you mean that getting a water jacket for it would be a problem ? Sorry to be a pain but I am in Trinidad and getting anything down here is a problem.

[JMSCARD]

I was on hobby King and I can't seem to find the said kv 45 motor and when you said it will need cooling did you mean that getting a water jacket for it would be a problem ? Sorry to be a pain but I am in Trinidad and getting anything down here is a problem.

Water jacket may be a problem... I think the kb sold on rcgroups that was 1600kv... you should be able to find a kb45 on here if you post a wanted add... hrc used to make water jackets for them... but you def could find a water jacket either use a lehner jacket and mod it... or again post a wanted ad for a jacket... hk doesn't have only the lower kv motors from kb... or they have the 2300kv which is a 4s motor... also buyer could easily mod the front motor mount plate to accept a 25mm spacing motor like a leopard 4092 or the like for power.

No pain lol... I just have other projects all over the place... this is a easy project, and not really even a project, just needs motor/esc/servo installed and run... basically its a Almost ready to run setup... buyer will not be disappointed with this fine boat... I almost want to rip the hardware off and sell the boat hull separate lol... hardware alone is very expensive on this boat, and I like it!!! lol... but its to well built and way to pretty to part out.

I will be listing this on other forums today so lmk if you're truly interested lmk :) one fancy boat :)

[Leeandre]

Will you do $650.00 shipped to 33191-1005 with the 180 amp esc ?

[JMSCARD]

Is that a US my last v2 i have and real clean low use one lol

[Leeandre]

That's my sky box in Florida. What you say ? Oh does it have 5.5 s on it , everything I have has 5.5s on them.

[JMSCARD]

If thats miami florida id do it for $660 if paid today...the ectra $10 to help with packaging supplies and ship as its running me $50 to ship as its a longggg box with rudder on and im not wantinf to remove nothing on this boat... it will be packaged likes its going in an egg drop competition :)

If $660 shipped with esc works pm me for pp info and send as goods and services NOT as gift lol... i want the discounted ship costs and proper addy showing up so i can print label via pp :)

Esc has 6.5mm on batt ends and motor end id put 6.5 on your motor leads def recommended but i can put 5.5mm on the esc for you no problem can do it tonight