F.S. NEW `HITEC SERVOS' MGs!

[K.R.Joye]

Selling large qty of items for a good friend. These servos have never been used. Everything but original box included.

(2) NEW/Unused `HITEC HS225-MG ' Servos, each comes w/hardware kit!
Retail $26.00
Asking $18.50 Shipped CONUS
Specs:
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.14sec/60° at no load
Operating Speed (6.0V): 0.11sec/60° at no load
Stall Torque (4.8V): 54.15 oz/in. (3.9kg.cm)
Stall Torque (6.0V): 66.65 oz/in. (4.8kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8mA/idle and 300mA no load operating
Current Drain (6.0V): 8.8mA/idle and 340mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: 1 Ball Bearing and 1 Oilite Bushing
Gear Type: 4 metal and 1 nylon
Connector Wire Length: 11.81" (300mm)
Dimensions: See Schematic
Weight: 1.10oz (31g)

(1) NEW/Unused `HITEC HS425-BB ' Servo, comes w/hardware kit!
Retail $13.00
Asking $7.50 Shipped CONUS
SPECS:
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.21sec/60° at no load
Operating Speed (6.0V): 0.16sec/60° at no load
Stall Torque (4.8V): 45.82 oz/in. (3.3kg.cm)
Stall Torque (6.0V): 56.93 oz/in. (4.1kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
Continuous Rotation Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8mA/idle and 150mA no load operating
Current Drain (6.0V): 8.8mA/idle and 180mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: Nylon
Connector Wire Length: 11.81" (300mm)
Dimensions: See Schematics
Weight: 1.6oz (45.5g)

Pay Pal Welcome

Respond to this post `I'll take...!'

[K.R.Joye]

`NEW' SERVO PRICE REDUCTION

$16.50 shipped CONUS on the HS-225MGs

$5.50 shipped CONUS on the HS-245BB

Pay Pal Welcome!

[TRUCKPULL]

Ken

Would you take $35.00 shipped to St. Catharines Ontario, Canada. for the two 225MG's

Larry

[TRUCKPULL]

Hello Ken

Did you forget about this thread??

I see you reposted the same items??

Laerry

[K.R.Joye]

Nope just a refresh with 2 additional, i'll make prices jive.

Please refer to lastest F.S. Hitec Servo MG & BBs thread: http://forums.offshoreelectrics.com/...OS-BBs-amp-MGs!

[JMSCARD]

Nope just a refresh with 2 additional, i'll make prices jive.

Please refer to lastest F.S. Hitec Servo MG & BBs thread: http://forums.offshoreelectrics.com/...OS-BBs-amp-MGs!

Hey Ken, I'll take the HS225mg if still avail .... send me pm with paypal if so... I use those in my 60" 3d planes they are good servos :)

[TRUCKPULL]

Jason

I think you must post in the new thread.
Look here;
http://forums.offshoreelectrics.com/...360#post660360

Larry

[K.R.Joye]

Jason i have (1) HS-225 MG still available $16.50 shipped. I'll PM my PP info.