Misc hardware and electronics

[royalcasa]

I don't know if there are differences between a V1 Geico 29 strut & BlackJack 29 strut, but I had to pull out the brass bushings & replace them with one of these from Kintec. I also had to turn down that shoulder about an 1/8 inch to make it go inside the strut deep enough that the end of the bushing would be flush with the end of the strut. This is all because there's not much (about 1.25") of that 2.25" left inside the strut once you have a drive dog, prop & nut on there. The stub shaft isn't really supported at all by the front strut bushing. I emailed Jeff Wohlt about this & he basically said, "yep..."

[ATTACH=CONFIG]133118[/ATTACH]

thank you for providing this information. Ill pass

[Sean]

Funds sent. Thanks Sean

[lt130th]

Funds sent. Thanks Sean

Thanks again, Sean. Will ship out tomorrow, & I'll PM you to confirm it's on the way.

Michael P.

[shua]

Received my box of goodies today. Thanks for the deal and the fast shipping!

[Sean]

Received

Michael, I received the esc today, thanks Sean.