45'' DF Sniper Hull & Hardware

[Rocstar]

Delta Force Sniper 45'' Hull and Hardware. This hull has been HEAVILY reinforced. Custom carbon fiber twin motor mount and battery tray. Speedmaster rudder, trim tabs, and flat bottom 1/4'' struts. Some scratches and chips in the paint, especially around the hatch. There was some gelcoat damage on the bottom that has since been repaired.
$500 or best plus shipping. For sale on another forum also.

New price, $400 plus shipping!

[Rocstar]

[Rocstar]

[z400]

Thats beautiful!

Im very interested


What Did you use to secure the end of the motors to the tabs coming up from the hull?
Also, what set up did it have and how well did it run?
Any videos?


Thanks!

[Rocstar]

Thats beautiful!

Im very interested


What Did you use to secure the end of the motors to the tabs coming up from the hull?
Also, what set up did it have and how well did it run?
Any videos?


Thanks!

It was set up with 22 series Lehners. I used MBP tail rings. Here is the build thread.
http://forums.offshoreelectrics.com/...ple-Digit-Mono

Video during testing.

[Rocstar]

Price drop $500 or best plus shipping. Make an offer.

[z400]

Im so damn interested, im just not too sure about the whole dual setup and all.

[Brushless55]

Nice boat Joel !

1) Why are you selling it ?
2) what silver does one need for touch up ?
3) what is the bolt pattern for the motor mount ? (I'm thinking twin CC1717)
4) what size are the prop shafts ?
5) what size props did you run and what was the rpms ?

thanks !

[Rocstar]

Nice boat Joel !

1) Why are you selling it ? Moving on to other projects.
2) what silver does one need for touch up ?http://www.amazon.com/Dupli-Color-BCC0410-Metallic-Exact-Match-Automotive/dp/B00407TVGS
3) what is the bolt pattern for the motor mount ? (I'm thinking twin CC1717) 30mm centers but the mount is also center punched for holes on 25mm centers. Just needs to be drilled out.
4) what size are the prop shafts ? 1/4'' flex stepped down to 3/16''
5) what size props did you run and what was the rpms ? The props and RPMs I was running were extreme and for SAW. I wouldn't recommend for sport boating. However, if someone was interested in running SAW I would do what I can to help out. I was going to keep it and use a pair of TP 4070s on 8 or 10s

[Rocstar]

Nice boat Joel !

1) Why are you selling it ?
2) what silver does one need for touch up ?
3) what is the bolt pattern for the motor mount ? (I'm thinking twin CC1717)
4) what size are the prop shafts ?
5) what size props did you run and what was the rpms ?

thanks !

Brushless, did I answer all your questions? Did you have any interest?

[steveo]

Are u willing to sell the hood scoops seperate, i am curios of the size of the one in the middle. If not wherr did u get them

[Rocstar]

Are u willing to sell the hood scoops seperate, i am curios of the size of the one in the middle. If not wherr did u get them

They came with the hull. If a buyer doesn't want them, I'll let you know.

[Brushless55]

1) Why are you selling it ? Moving on to other projects.
2) what silver does one need for touch up ?http://www.amazon.com/Dupli-Color-BCC0410-Metallic-Exact-Match-Automotive/dp/B00407TVGS
3) what is the bolt pattern for the motor mount ? (I'm thinking twin CC1717) 30mm centers but the mount is also center punched for holes on 25mm centers. Just needs to be drilled out.
4) what size are the prop shafts ? 1/4'' flex stepped down to 3/16''
5) what size props did you run and what was the rpms ? The props and RPMs I was running were extreme and for SAW. I wouldn't recommend for sport boating. However, if someone was interested in running SAW I would do what I can to help out. I was going to keep it and use a pair of TP 4070s on 8 or 10s

Thanks

Brushless, did I answer all your questions? Did you have any interest?

I am interested but need proper collets to use my CC1717 motors

[Rocstar]

Thanks



I am interested but need proper collets to use my CC1717 motors

5mm - .250

http://www.offshoreelectrics.com/pro...?prod=mbp-1000

[Brushless55]

Great find bro !
now you have me thinking of this hull agian...
$$$