Entry Level Everyday HPR115

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nata2run
    customcfparts.com
    • Nov 2011
    • 1837

    #1

    Entry Level Everyday HPR115

    Entry Level Everyday HPR115
    I’m regretfully selling my everyday HPR 115 to make room for a new build. But in the missus eye’s a boat is a boat and I have too many as it is.
    Hull: Older style HPR 115 glass with reinforced carbon inlay (in some areas)
    Motors: TP 4050/2200kv
    ESC’s: TP180 with added Panasonic Caps
    Servo: Low profile Bluebird
    Collets: MBP 5mm-5mm Shaft
    Props: Andy Brown L/R 47mm re/44mm DT
    Paint: Silver base/pearlescent top coat
    Hardware: Original HPR, Chrome polished rudder attachment, blue anodized drives. 5mm Drive cables
    CustomCFparts Lipo Slide System for up to 8s
    Max Speed: 93mph with the 44mm props (in a very small pond) there is more go in this boat!

    History: The hull was purchased from Germany in a slight crashed condition, it has since then been rebuilt by me, and had some carbon inlay done over the weak areas. Motor mounts have been moved and a lipo slide system has been installed. The water cooling pickups has also been redone. Basically the whole boat has had a make over to get it back to working condition. The hull today is in a perfect working condition with minor stress cracks in the paint (1 area only) but she has been thrown around. Its not a “pretty boat” in my eyes but very stable and nice to drive. Its not for the fuzzy purchaser that is looking for glamour, but rather for someone that wants to step up from a different type of boat and try a HPR. With a set of 47mm props on 6s she should push 100mph ??

    $1650 to your door
    Last edited by nata2run; 05-27-2015, 06:28 AM.
    Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
    "Follow someone's footsteps and you will always be a step behind"
  • nata2run
    customcfparts.com
    • Nov 2011
    • 1837

    #2
    fr_1210_size880.jpgfr_1211_size880.jpgfr_1212_size880.jpgfr_1213_size880.jpgfr_1214_size880.jpg
    Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
    "Follow someone's footsteps and you will always be a step behind"

    Comment

    • nata2run
      customcfparts.com
      • Nov 2011
      • 1837

      #3
      fr_1215_size880.jpgfr_1216_size880.jpgfr_1217_size880.jpgfr_1218_size880.jpgfr_1220_size880.jpg
      Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
      "Follow someone's footsteps and you will always be a step behind"

      Comment

      • nata2run
        customcfparts.com
        • Nov 2011
        • 1837

        #4
        Taking offers, this is truely a cool boat for fun!
        Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
        "Follow someone's footsteps and you will always be a step behind"

        Comment

        • slr30ate
          Junior Member
          • Apr 2015
          • 7

          #5
          mhz 114

          hi i dont suppose u have a mhz 114 with hardware lying around u wanna sell

          Comment

          • nata2run
            customcfparts.com
            • Nov 2011
            • 1837

            #6
            No sorry, but if you need carbon hardware can make some up. Let's take this to PM ��
            Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
            "Follow someone's footsteps and you will always be a step behind"

            Comment

            • slr30ate
              Junior Member
              • Apr 2015
              • 7

              #7
              is this price in ozzy $ or us

              Comment

              • nata2run
                customcfparts.com
                • Nov 2011
                • 1837

                #8
                Originally posted by slr30ate View Post
                is this price in ozzy $ or us
                I think there is a rule here to only post in USD, but if you're interested make me an offer :-) depending where you are I may save on post and pass the saving onto you. Shipping to US is about $350 so $1350 USD plus post was the goal.
                Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                "Follow someone's footsteps and you will always be a step behind"

                Comment

                • nata2run
                  customcfparts.com
                  • Nov 2011
                  • 1837

                  #9
                  I was being polite calling this an Everyday Entry Boat
                  If it helps with the sale, I'll call it.... Fast HPR115/06 for sale LOL

                  Motors and ESC's have about 5-7 "4min" runs on them and in perfect condition! The Andy Brown props alone are like $140! Everything is in perfect working order!

                  Any grabs $1280 plus post to your destination?? Buyer is also entitled to a decal set (almost of your choice)
                  Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                  "Follow someone's footsteps and you will always be a step behind"

                  Comment

                  • shua
                    Senior Member
                    • Apr 2015
                    • 479

                    #10
                    What would post to Virginia 24018 be?

                    Comment

                    • nata2run
                      customcfparts.com
                      • Nov 2011
                      • 1837

                      #11
                      If you pay 200 I'll pay the rest
                      Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                      "Follow someone's footsteps and you will always be a step behind"

                      Comment

                      • shua
                        Senior Member
                        • Apr 2015
                        • 479

                        #12
                        Originally posted by nata2run View Post
                        If you pay 200 I'll pay the rest
                        Thanks for the Quote. I think this maybe too much boat for me. Can it be "detuned" for more of a sport use? What cells? 4s2p?

                        Comment

                        • nata2run
                          customcfparts.com
                          • Nov 2011
                          • 1837

                          #13
                          Of cause can be de-tuned to a sport setup. 5s will do about 75-80mph 4s 65-70mph. I'm sure that eventually you would want the speed its capable of
                          Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                          "Follow someone's footsteps and you will always be a step behind"

                          Comment

                          • shua
                            Senior Member
                            • Apr 2015
                            • 479

                            #14
                            Man this is tempting. What decal set are you offering and would you install it before shipping? (I fully understand that this boat has some milage and adding said decal set will not make it "new", just look cooler)
                            How would it handle a freashwater, choppy lake?

                            Comment

                            • nata2run
                              customcfparts.com
                              • Nov 2011
                              • 1837

                              #15
                              You can almost chose the decal set as I fabricate them :-) it handled great in a little chop, as long as it's not 1 foot waves, at sports running some chop is fine. It's those 100mph runs where you want a fairly calm lake. The boat has a little mileage on it but components are fairly new. So are the bearings in the drives and I can ad a set of new bearings on the side with the sale. My honest opinion I don't think you will have any problems with this setup what so ever.
                              Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
                              "Follow someone's footsteps and you will always be a step behind"

                              Comment

                              Working...