RTR OSE Pursuit Mono Race Boat FS

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lawdog
    Member
    • Mar 2013
    • 36

    #1

    RTR OSE Pursuit Mono Race Boat FS

    Hate to do this... up for sale is my OSE Pursuit Mono Race Boat Fiberglass- Yellow. Has all the fixins... RTR with Futaba controller, ESC and Leopard Engine from OSE... pretty much as built by OSE with some upgrades, upgraded to aluminum water cooler jacket. Drop in cable upgrade, polished balanced prop upgrades, collar upgrade... too much to list on this boat. Will include all misc. items as well... extra bullet connectors, card readers, tools, grease, caps, hatch tape, extra carbon fiber I got to do some interior mods... It is extremely fast as is but could be faster with tweaking...

    Will include Icharger 206B plus power supply and all Lipos i have including Dinogy race packs (I think 4 batteries total)... lots invested in the boat and will include everything i have. I would estimate over $2500 total in this package. Will sell entire lot for $1250 OBO... I am in Ohio and willing to travel to meet somewhere halfway in there is interest to avoid shipping all this.

    Couple minor scuffs on boat but no major damage or wrecks ever... this is complete package perfect for a new racer who wants in for one price with everything all at once... my loss your gain. Holiday Gifts anyone?

    Thanks for looking...

    Mono Boat_1.jpgMono Boat_2.jpg
  • luisoque
    Senior Member
    • Jul 2011
    • 595

    #2
    I interest in it take a pic for the inside and how much is the shipping to mass 01757

    Comment

    • lawdog
      Member
      • Mar 2013
      • 36

      #3
      Certainly... will take some inside shots tonight and post them... I will check on shipping to Mass..

      Comment

      • luisoque
        Senior Member
        • Jul 2011
        • 595

        #4
        Ok no problem i very interest in it thanks

        Comment

        • lawdog
          Member
          • Mar 2013
          • 36

          #5
          Here are some shots of the inside as well as pictures of some of the other items included: 2 Dinogy 6000 mah 5c race packs; 2 Turnigy 5000 mah packs (all batteries are stored in LIPO Storage mode) - Lipo safe bag, Icharger 206B with power supply - New Carbon Fiber battery tray/motor mounts and carbon sheet as i was going to do the carbon fiber upgrade on the inside.

          I added some JB weld to reinforce the motor mounts and battery tray sections which is the grey you see in the pics and velcro is added up front to hold the packs... also included is the TRAXXAS water proof receiver case with receiver installed for the Futaba Digital controller system. Picture of one nick on front edge of boat from a race love tap and picture of bottom of boat... I added a thin layer of epoxy to V area for extra strength... doesn't slow the boat at all... i did get a run or two on the epoxy that I intended to sand down over the winter but haven't yet and you can see it in the Hull picture.

          Mono Boat_3.jpgMono Boat_4.jpgMono Boat_5.jpgMono Boat_6.jpgMono Boat_7.jpg

          Comment

          • lawdog
            Member
            • Mar 2013
            • 36

            #6
            Extra photos - Mono Boat_8.jpgMono Boat_9.jpgMono Boat_10.jpg

            Comment

            • lawdog
              Member
              • Mar 2013
              • 36

              #7
              Bump... Answered all Inbox questions...

              Comment

              • macace123
                Robotics Operator
                • Mar 2013
                • 477

                #8
                Will you sell just hull and hardware
                Its not the boat its the driver http://namba2016fenats.com/
                Whiplash,Sprint Cat, Pursuit, 83' Miss Rock modern hydro JAE21, Dragon M11 Tunnel, Mickey Beez Jet, CF JAE21

                Comment

                • lawdog
                  Member
                  • Mar 2013
                  • 36

                  #9
                  Would prefer to sell entire package... But if enough interest to part out I would.

                  What hardware would you want? Just the hull and transome hardware? No servo or esc? What about the extra carbon fiber parts I have? Just let me know what you are thinking

                  Comment

                  • macace123
                    Robotics Operator
                    • Mar 2013
                    • 477

                    #10
                    Let me know I would also take servo ESC and dinogys
                    Its not the boat its the driver http://namba2016fenats.com/
                    Whiplash,Sprint Cat, Pursuit, 83' Miss Rock modern hydro JAE21, Dragon M11 Tunnel, Mickey Beez Jet, CF JAE21

                    Comment

                    • macace123
                      Robotics Operator
                      • Mar 2013
                      • 477

                      #11
                      I would want everything on the back turn fins trim tabs hull
                      Its not the boat its the driver http://namba2016fenats.com/
                      Whiplash,Sprint Cat, Pursuit, 83' Miss Rock modern hydro JAE21, Dragon M11 Tunnel, Mickey Beez Jet, CF JAE21

                      Comment

                      • Carelessking
                        Member
                        • Oct 2014
                        • 65

                        #12
                        Price on turnigy packs????also how many cells????

                        Comment

                        • lawdog
                          Member
                          • Mar 2013
                          • 36

                          #13
                          I will lower my full package price to avoid parting out... So $1K plus $25 to ship for everything! $1025 OTD! That is a steal...

                          If no takers at that price part out will be as follows prices plus shipping:

                          OSE Pursuit Mono Boat Hull and Hardware with ESC extra caps and Servo mounted - OSE Leopard 4082 2200 kv motor with upgraded aluminum Leo water jacket mounted with water cooled motor mount plus upgraded collet- hatch tape, $500 (figure $30 to ship) (really don't want to yank the engine out)

                          Drop in flex cable for pursuit $30

                          Octura M445 prop balanced/sharp $30

                          Dinogy 65c 6000 mah 4s race packs - $90 each $180 both

                          Turnigy 50C 5000 mah 4s packs $45 each $90 both

                          Futaba 3pl 2.4 g controller/receiver and traxxas water proof receiver box - $100

                          3 Extra servos plus parts -$50

                          Carbon fiber kit - motor mounts- battery tray and 18 inch fiber sheet - $65

                          I charger 206b plus external power supply and octo cable from buddy rc to charge multiple packs $150

                          Misc box of 5.5mm bullets, splitters to run 4sx2, battery straps, infrared heat reader, esc program card, coolant lines, epoxy, bullet caps, orings, washers, Teflon tube, grease... Lots! - $75

                          Might have more to post but will be including everything i can find in the full package deal...some one take this before I change my mind! Thanks...

                          Comment

                          • skyhighwave
                            Member
                            • May 2011
                            • 83

                            #14
                            Originally posted by lawdog View Post
                            I will lower my full package price to avoid parting out... So $1K plus $25 to ship for everything! $1025 OTD! That is a steal...

                            If no takers at that price part out will be as follows prices plus shipping:

                            OSE Pursuit Mono Boat Hull and Hardware with ESC extra caps and Servo mounted - OSE Leopard 4082 2200 kv motor with upgraded aluminum Leo water jacket mounted with water cooled motor mount plus upgraded collet- hatch tape, $500 (figure $30 to ship) (really don't want to yank the engine out)

                            Drop in flex cable for pursuit $30

                            Octura M445 prop balanced/sharp $30

                            Dinogy 65c 6000 mah 4s race packs - $90 each $180 both

                            Turnigy 50C 5000 mah 4s packs $45 each $90 both

                            Futaba 3pl 2.4 g controller/receiver and traxxas water proof receiver box - $100

                            3 Extra servos plus parts -$50

                            Carbon fiber kit - motor mounts- battery tray and 18 inch fiber sheet - $65

                            I charger 206b plus external power supply and octo cable from buddy rc to charge multiple packs $150

                            Misc box of 5.5mm bullets, splitters to run 4sx2, battery straps, infrared heat reader, esc program card, coolant lines, epoxy, bullet caps, orings, washers, Teflon tube, grease... Lots! - $75

                            Might have more to post but will be including everything i can find in the full package deal...some one take this before I change my mind! Thanks...

                            I'll take Octura M445 prop balanced/sharp $30

                            please advise how much to ship to 97124

                            Comment

                            • lawdog
                              Member
                              • Mar 2013
                              • 36

                              #15
                              Sorry let me clarify... I need to confirm the boat is sold before I part out the other stuff... The m445 is wicked on this boat and if the boat doesn't sell I will just keep everything and run it... Thanks

                              Comment

                              Working...