SOLD
Posting my MG29 boat for sale. Don't need to sell, but it's headed for the chopping block. Hull is in good shape, a few scuffs on the bow tips. No cracks or damage to hull. The bow tips have been filled with 2 part expanding foam for strength and floatation. Pool noodle has been fit throughout also for floatation. The inner clear water lid got lost, but it won't work with how the boat is currently set-up (motor is too big). It is fitted with through hull water fittings, and the water lines have been upgraded to 4mm black kintec water line. Under the hatch, the boat is powered by a Seaking 180a v3 2s-6s ESC and a Leopard 4082 2200kv motor. Stock servo and RX. I have upgraded the flex shaft to a .187" flex because the motor was snapping the stock .150" shafts. Also, the strut has been upgraded to the OSE strut with lead bushings, really smooths out operation over the stock brass bushings in the stock strut. currently fit with an octura m454 prop. It also has a kintec off set rudder bracket for better handling.
SOME PAINT DAMAGE TO HATCH WHERE I HAD A GOPRO MOUNTED!!
The boat is currently setup to run 4s, because of the kV.
Will include the boat, some misc props, and aqua craft flex shaft lube.
I'm looking for $275 + shipping w/o tx OR $365 + shipping w/ dx3s
*dx3s is scratched up, and the roller/select button require an extra press to register sometimes.
Posting my MG29 boat for sale. Don't need to sell, but it's headed for the chopping block. Hull is in good shape, a few scuffs on the bow tips. No cracks or damage to hull. The bow tips have been filled with 2 part expanding foam for strength and floatation. Pool noodle has been fit throughout also for floatation. The inner clear water lid got lost, but it won't work with how the boat is currently set-up (motor is too big). It is fitted with through hull water fittings, and the water lines have been upgraded to 4mm black kintec water line. Under the hatch, the boat is powered by a Seaking 180a v3 2s-6s ESC and a Leopard 4082 2200kv motor. Stock servo and RX. I have upgraded the flex shaft to a .187" flex because the motor was snapping the stock .150" shafts. Also, the strut has been upgraded to the OSE strut with lead bushings, really smooths out operation over the stock brass bushings in the stock strut. currently fit with an octura m454 prop. It also has a kintec off set rudder bracket for better handling.
SOME PAINT DAMAGE TO HATCH WHERE I HAD A GOPRO MOUNTED!!
The boat is currently setup to run 4s, because of the kV.
Will include the boat, some misc props, and aqua craft flex shaft lube.
I'm looking for $275 + shipping w/o tx OR $365 + shipping w/ dx3s
*dx3s is scratched up, and the roller/select button require an extra press to register sometimes.
Its not the boat its the driver
Comment