SOLD SOLD SOLD
Selling a very competitive boat. 2011 Phil Thomas Stealth 30" FE hydro. Set up and dialed in for LSH class oval racing. In about 1 hour you could have this thing ready run! I ran this hull with a 2030 Aquacraft motor and Hydra 120 ESC with 2 5000 mha 2S lipos. Add your radio receiver and a ABC H-5 prop and you will have a fast one! Last time I put a GPS in this one, it ran 54.8 MPH top speed on a tight sub 1/6 mile oval course on the MMEU home pond. Finished 3rd overall in the big 2013 Michigan cup race LSH class.
Details:
Fiberglass Steath Hydro built in August 2011
Custom Smokin Joes inspired yellow and purple Dupont base coat with 2 part acrylic clear coat.
UL-1 custom painted rear fins
Sponsons have been edge sharpened and squared up.
Custom tig welded Mojo Racing motor mount
Hi-Tec 645-MG metal gear steering servo
High quality steering arm and 440 steering linkage with quick change rudder arm ball joint
Speedmaster mini-rudder and flat bottom hydro strut with bushing
Virginia Craftsman turn fin and bracket
Huey made in USA 0.150" flex drive shaft and Octura 5mm x 0.150" motor coupler included with sale. 1/4" brass stuffing tube with Teflon liner.
Build thread is here: http://forums.offshoreelectrics.com/...rt-20-FE-Build
Video of boat running when new: http://www.youtube.com/watch?feature...&v=lDloHeNiYjY
Boat is in very good condition. It does have a couple of minor stress cracks and nicks/scrapes and other minor damage. This thing has 2.5 seasons of racing on it. There are areas where the clear coat was pulled away from hatch taping. I did do a recent touch up job to re-clear the bad spots. I will remove the turn fin bracket for shipping so you do not loose the set-up. Save yourself a ton of time and money building your own. Asking $330. Buyer pays actual shipping cost. Photos taken last night ITEM SOLD!
Selling a very competitive boat. 2011 Phil Thomas Stealth 30" FE hydro. Set up and dialed in for LSH class oval racing. In about 1 hour you could have this thing ready run! I ran this hull with a 2030 Aquacraft motor and Hydra 120 ESC with 2 5000 mha 2S lipos. Add your radio receiver and a ABC H-5 prop and you will have a fast one! Last time I put a GPS in this one, it ran 54.8 MPH top speed on a tight sub 1/6 mile oval course on the MMEU home pond. Finished 3rd overall in the big 2013 Michigan cup race LSH class.
Details:
Fiberglass Steath Hydro built in August 2011
Custom Smokin Joes inspired yellow and purple Dupont base coat with 2 part acrylic clear coat.
UL-1 custom painted rear fins
Sponsons have been edge sharpened and squared up.
Custom tig welded Mojo Racing motor mount
Hi-Tec 645-MG metal gear steering servo
High quality steering arm and 440 steering linkage with quick change rudder arm ball joint
Speedmaster mini-rudder and flat bottom hydro strut with bushing
Virginia Craftsman turn fin and bracket
Huey made in USA 0.150" flex drive shaft and Octura 5mm x 0.150" motor coupler included with sale. 1/4" brass stuffing tube with Teflon liner.
Build thread is here: http://forums.offshoreelectrics.com/...rt-20-FE-Build
Video of boat running when new: http://www.youtube.com/watch?feature...&v=lDloHeNiYjY
Boat is in very good condition. It does have a couple of minor stress cracks and nicks/scrapes and other minor damage. This thing has 2.5 seasons of racing on it. There are areas where the clear coat was pulled away from hatch taping. I did do a recent touch up job to re-clear the bad spots. I will remove the turn fin bracket for shipping so you do not loose the set-up. Save yourself a ton of time and money building your own. Asking $330. Buyer pays actual shipping cost. Photos taken last night ITEM SOLD!
Comment