AE RC8.2e Nitro Conversion ARTR or Roller

[gtrcguru]

Roller traded to Steveo for H&M Supercat

[steveo]

i have a hull and hardware 34" h&m supercat would u consider that for a trade for roller

[gtrcguru]

Is this a new hull or an older hull? ABS or fiberglass? H&M who is the manufacture? Have any pics?

[steveo]

here is a little build thread till i can snap a few pics, the interior has changed i will post pics tonite- boat is fiberglass, hydro and marine is the manufacture

dimensions r 34"x 11"

http://forums.offshoreelectrics.com/...cat&highlight=

[steveo]

new pics

[steveo]

boat is pretty clean the front tips on the sponsons were damaged upon shipping and there is a glencoat hair line fracture at the top of boat near the rear, holes on the bottom have been filled with epoxy, a .187 flex shaft w/ 5mm to .187 collect and thrust bearing included, no servo

[gtrcguru]

I am interested. is this boat ready to go. do I need anything besides elec. to get this boat going? LMK

[gtrcguru]

If you are still interested I think I would like to make a trade. After reading your build thread I think this is a perfect boat for me. Been wanting a boat to twin and looks like I found a winner. LMK

[steveo]

Its ready for any single motor application right now add ur electronics and let it fly. I wanted to do twins as well but there alocal track racing buggy and truggys nitro and electric I just finished a new electric truggy. Would be nice to have a buggy as well. If u want to trade lets do. Also look in the video section there is a twin super cat doing 70mph with a pair of castle 1515

[steveo]

If u were wondering about the wood in the center section it was to stiffen it up there was more flex than I like because of the span between sponsons

[gtrcguru]

Ok its an accord. I will ship tomorrow usps w/ tracking.
Going to take off wing mount and tires for ease of shipping.
Thanks
Greg Thompson

[steveo]

Great I will get it boxed up and out as well w/ track #

[gtrcguru]

If u were wondering about the wood in the center section it was to stiffen it up there was more flex than I like because of the span between sponsons

Had a feeling that was what it was for. Plan on running single motor for now till I get the funds for the twin project. I will be robbing the Impulse for the SK 180 CC 2650 for the supercat and installing the MMM and 2200 out the buggy into the Impulse.

[steveo]

Be careful its a large boat if I were u I would put the 1515 in the supcatbecause of the rpm and its a litte big just a suggestion otherwise watch ur temps. I had a 1520 castle with 6s2p w/ m545 and sk t-180 for 61 mph

Iwas going to ask if u wanted to sell the mmm but I see ur going to use it

[gtrcguru]

thanks for the heads up. may try the 1515 on 6s first then the 1512 on 4s.
I have few props like octura x442, m645, V937/3, x452/3 40mm, 45mm cnc's and grim 40x52/3. I'm partial to 3 bladers
Hoping that one of these is the ticket. Maybe one of the guy's who has built this will chime in w/ a good prop starter choice