AquaCraft Mini Mono Brushless Motor & ESC

[J.W. Pepper]

I purchased these guys for a project I was going to do, cancelled the project, time to send them to a new home.

Brushless Outrunner Motor
Specs:
KV Rating: 2200Kv
Max Current: 28A
Input: 3S LiPo Battery
Operating Current: 1.4A, 8V/DC (without Loading)
Dimensions: 27.5mm (1.0826") x 30mm (1.1811")
Shaft Diameter: 3.175mm (has flat spot for grub screw)
Motor Resistance: 50 meg-ohms
Weight: 47g

Water Cooled 20-amp Brushless ESC
Specs:
Rated current: 20-amps
Battery Connectors: Male Deans Ultra Plug
Motor Connectors: 3.5mm gold plated bullet connectors
Stutter Bump Warning System: 9.6V
Low Voltage Cutoff: 9V
BEC Max Current: 2A
Wire Gauge: 14G
PWM: 8K
Dimensions: 45mm(1.77") x 24mm(.9448") x 9mm(.3543")

This set comes with everything seen in the pix, Mini Mono motor mount, (3x) 3mm x 6mm hex head screws to attach motor to the mount & all cooling lines / hoses.

These are new parts removed from a Mini Mono, I gave them a function test, they work fine, other than that, they are in new condition.

$45 shipped to USA

[lenny]

Hey Bruce,
Do you still have the hull that you pulled that stuff out of ?

Lmk thanks.

[eboeske]

I'll go 30.00 on it.

[J.W. Pepper]

I'll go 30.00 on it.

no thanks

[eboeske]

Will you go 35.00 on it.

[J.W. Pepper]

Will you go 35.00 on it.

Yeah, why not?? With the TR-324's you bought that will put $65 towards the purchase of the Seaking 120A ESC Steve Vaccaro suggested I put in my new PB IM-31.

To clarify, the MM parts are sold to eboeske pending payment.

[eboeske]

Payment sent! Thanks Bruce.

[J.W. Pepper]

Payment received, thank you!!

I found a good box, will ship the parts tomarrow morning with the Tactic TR-324 Rx's you bought yesterday.

Will e-mail a scanned copy of the receipt from the post office with tracking info.

You can find a copy of the manual here... http://manuals.hobbico.com/aqu/aqub1805-manual.pdf -- page-5 contains info on arming the system / ESC.

[J.W. Pepper]

Payment sent! Thanks Bruce.

Eric,
Shipped your parts at 1:11pm (PST) today, sent an e-mail to your PP addy with the tracking number, link to the USPS website - package tracking section and a scanned copy of the postal receipt (has the tracking number on it) in Adobe PDF format.

Scheduled delivery date is: Thursday the 25th.

Please use a box knife and cut the tape on the bottom of the box, there's several layers of bubble wrap there to protect the contents.

I included some free goodies for you, enjoy!


UPDATE: Eric just tracked your package and saw that it got delivered today, did it arrive damage free?? Are you happy with the extra's?? Please advise, thanks.

[lenny]

Hello, Is There Anybody in There ?

Hey Bruce,
Do you still have the hull that you pulled that stuff out of ?

Lmk thanks.

[J.W. Pepper]

Hello, Is There Anybody in There ?

Lenny,
I bought those parts for a project - BL AQ Mini Thunder, got busy with other projects so the BL MT went on the back burner. Then along came a once in a life time chance at a real FE boat for $150 after un-wanted parts were sold off. As I've stated in several posts, I've been all in on that boat for the past 3+ weeks.

Just did an order with Jan for the speedo before he gets force'd to jack his prices to, and yes, I got a set CC 5.5's to go with it. It's not QC issue as Tim stated, it's a design issue, CC has 1-piece 4mm's that are just like they're 5.5's, but they're only for up to 75A, 5.5's can do 150A.

[eboeske]

Received parts today!!!! Must say I'm very happy with everything!!!! Thanks for the extra goodies!

[J.W. Pepper]

Received parts today!!!! Must say I'm very happy with everything!!!! Thanks for the extra goodies!

Your most certainly welcome, thanks for the update!