Proboat Impulse 31

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • d.a.v.e
    Senior Member
    • Jan 2011
    • 222

    #1

    Proboat Impulse 31

    Bought this boat in the spring with the intent of racing it but never got around to it and have run it about 10 times. Comes with stock radio, all stock electronics, the stock prop and flex cable. I have added 5mm bullet connectors to the motor and an EC5 connector to the ESC. It has an upgraded OSE flex cable, upgraded stainless collet, upgraded m445 prop, and extra large fuel tubing for cooling. I did 3 1oz pours of two part foam to add flotation and strength to the haul. I also epoxied Carbon Fiber/Kevlar cloth to the hatch for added strength. The center bolt was removed for better balance. I will include the bolt and mount plate if you wish to put it back in. There is a small spider crack on port side of the transom but other then that there are no issues with the hull.

    The boat has never been wrecked, sunk, or otherwise mistreated. If you have any questions please ask!

    $225 OBO Shipped (in the US)



    IMAG0131.jpgIMAG0132.jpgIMAG0133.jpg
    Last edited by d.a.v.e; 10-01-2012, 07:32 AM.
  • Jersey Crewmax
    Senior Member
    • Jul 2012
    • 443

    #2
    Can I get a picture of the stress crack

    Comment

    • d.a.v.e
      Senior Member
      • Jan 2011
      • 222

      #3
      Its pretty small. Boat is a little dirty in this picture as I ran it last night and haven't cleaned it up yet.

      IMAG0134.jpg

      Comment

      • steinersamuel
        Senior Member
        • Nov 2008
        • 405

        #4
        Any trades?? Im local, Chelsea, west of ann arbor.

        Comment

        • d.a.v.e
          Senior Member
          • Jan 2011
          • 222

          #5
          What do you have in mind?

          Comment

          • bob_t
            Senior Member
            • Sep 2012
            • 157

            #6
            What battery, or batteries, did you use? Photo 1 looks like it is set up for single battery, instead of the two 2s's. I assume I would need to get a jumper harness to run 2-2s. Just asking because my other boats are all 2-2s.

            Comment

            • d.a.v.e
              Senior Member
              • Jan 2011
              • 222

              #7
              Yes is set up with a single end on it. But its easy enough to sodder your end of choice on or split it by adding in the third wire.

              I run a variety of packs. Most common was 1 4cell. But I have run it with 2 4 cells for extended run time and 2 2 cells. I have a parrell and series cables made that I plug in depending on what I'm going to run that day.

              Comment

              • d.a.v.e
                Senior Member
                • Jan 2011
                • 222

                #8
                Dropped the price a bit. Please let me know if your interested!

                Comment

                • steinersamuel
                  Senior Member
                  • Nov 2008
                  • 405

                  #9
                  Sorry its been a min dave. Ive got a like new, ran 3 times 1/16 summit vxl rtr i would like to offer u in trade. let me know what u think. will send any pics u need if interested. im the local guy, Thanx Sammy

                  Comment

                  • Timc
                    Junior Member
                    • Oct 2012
                    • 6

                    #10
                    I'll take it. Can send paypal now.

                    I am new here but not a scammer. I use this screen name on other forums as well as Timmyc if this one is taken.

                    I'm in MI too so shipping should be cheap for you.

                    Comment

                    • d.a.v.e
                      Senior Member
                      • Jan 2011
                      • 222

                      #11
                      steinersamuel - I'm interested in the trade but my first choice is cash if Timc does not come though I'll take you up on the offer.

                      Timc - Have sent you PM with PP info. Please let me know when you send payment.

                      Comment

                      • d.a.v.e
                        Senior Member
                        • Jan 2011
                        • 222

                        #12
                        Sold

                        Comment

                        Working...