FS: X-Crab Evo Rigger w/ Hardware
You won't see this often, but I'm going to let this boat go. I can't even remember the last one I sold. I seem to remember trading one a few years ago 
If you're interested, let me know and I can work with you regarding components I may have sitting around the shop.
This model is the new, revamped version with manufacturer mods to the ride pads and wings. I have also fabricated several custom TITANIUM parts for strength and to reduce weight. This means that this is the one that actually gets on plane, unlike the original (thus the "evo" designation). This version was a special order in White gelcoat and the only one in White in the U.S. It costs $400 to order this from the other side of the world before shipping costs and doesn't come assembled or with hardware installed or setup.
I've had this model for quite some time now, but I'm thinking of letting her go because I need funds for another project. These models are suitable for running 2s, 3s, or 4s. Please note that if you're going to run 2s, please be aware that it requires an ESC with ample amp capability. I cannot recommend anything less than 150A. Unless you are racing in certain classes, it's best to stick with 3s and 4s.
Detailed information:
- Length : 695mm (27.4")
- Width : 378mm (14.9")
If there is interest, then I will consider selling.
I would consider selling as hull and hardware only for $375 plus actual shipping which includes: strut, rudder (either original without water pickup or water pickup shortened version), custom Titanium turnfin, motor mount, custom Titanium servo mount, and flex cable.
OR with hull and hardware identified above plus motor (no water jacket), coupler, and servo for $425 plus actual shipping. All you would have to do is drop in your batteries, add an ESC and receiver, a prop and you're ready to fly. The motor is a 36mm and 5000kv. The servo is a JR 270.
Provided below are some pictures.
IMG00068-20120317-2138.jpg IMG00069-20120317-2138.jpg IMG00067-20120317-2136.jpg IMG00072-20120317-2140.jpg IMG00063-20120317-1553.jpg
If you're interested, let me know and I can work with you regarding components I may have sitting around the shop.This model is the new, revamped version with manufacturer mods to the ride pads and wings. I have also fabricated several custom TITANIUM parts for strength and to reduce weight. This means that this is the one that actually gets on plane, unlike the original (thus the "evo" designation). This version was a special order in White gelcoat and the only one in White in the U.S. It costs $400 to order this from the other side of the world before shipping costs and doesn't come assembled or with hardware installed or setup.
I've had this model for quite some time now, but I'm thinking of letting her go because I need funds for another project. These models are suitable for running 2s, 3s, or 4s. Please note that if you're going to run 2s, please be aware that it requires an ESC with ample amp capability. I cannot recommend anything less than 150A. Unless you are racing in certain classes, it's best to stick with 3s and 4s.
Detailed information:
- Length : 695mm (27.4")
- Width : 378mm (14.9")
If there is interest, then I will consider selling.
I would consider selling as hull and hardware only for $375 plus actual shipping which includes: strut, rudder (either original without water pickup or water pickup shortened version), custom Titanium turnfin, motor mount, custom Titanium servo mount, and flex cable.
OR with hull and hardware identified above plus motor (no water jacket), coupler, and servo for $425 plus actual shipping. All you would have to do is drop in your batteries, add an ESC and receiver, a prop and you're ready to fly. The motor is a 36mm and 5000kv. The servo is a JR 270.
Provided below are some pictures.
IMG00068-20120317-2138.jpg IMG00069-20120317-2138.jpg IMG00067-20120317-2136.jpg IMG00072-20120317-2140.jpg IMG00063-20120317-1553.jpg
Comment