pursuit mono i put together with same factory parts as the rest. batteries can be set in center or off to the sides it has 4" rails and i added wood between the rails to stiffen up the hull. has flotation in the nose. .150 cable smooth driveline, the motor mount is alittle difficult to work on so i drilled a hull above the stinger to allow an a longer allen to reach motor screw that i seal up with silicon boat, hull has a few scratches on the bottom but pretty clean
medusa 3680 2000kv motor w/ thrust bearing
swordfish 200 a 6s esc
hitec servo
x442 prop
2x-turnigy 5000mah 40c 4s packs
motor is used not abused, esc only has 3 runs on it batts 10 runs boat has not been in the water alot
$350 shipped lower 48 gift or add3% for paypal
thanks
DSC_0109.jpgDSC_0104.jpgDSC_0107.jpgDSC_0106.jpgDSC_0105.jpg
medusa 3680 2000kv motor w/ thrust bearing
swordfish 200 a 6s esc
hitec servo
x442 prop
2x-turnigy 5000mah 40c 4s packs
motor is used not abused, esc only has 3 runs on it batts 10 runs boat has not been in the water alot
$350 shipped lower 48 gift or add3% for paypal
thanks
DSC_0109.jpgDSC_0104.jpgDSC_0107.jpgDSC_0106.jpgDSC_0105.jpg

Comment