FS: Speedmaster Hardware, Servo, Scorpion Outrunner

[Dangerous_Toys]

Sold

I Have a build that I am putting off for now so I am going to pass on some of the items to someone who might need it. I was in the process of building a 51" Shovelnose but got more involved in building racing buggies and Truggies so I put the boat on hold. The listed prices include shipping to the lower 48 plus pp fees. If you want to reduce your cost you can send payment as a XXXX. Here is what I have up on the chopping block....

1. Speedmaster Dual Pickup Straight Blade rudder assembly. The assembly has a 4" setback witha 6 1/4" rudder. This is new but has been used for mock up purposes only. SOLD

2. Speedmaster Large Strut w/ .187 bushings. This is new, never mounted. Asking $SOLD

3. Hitec HS-755MG 1/4 scale servo. This has been used but functions flawlessly.SOLD

4. Scorpion HK-4035 800KV Outrunner. This is new but has been used for mock up purposes only.SOLD

I will let the remaining item go for $21 Shipped to the lower 48

[Dangerous_Toys]

More pics.....

[lenny]

More info please.

What are the dimensions of the rail mount ?
Looking to put motor in the 48"Stealth mono.
And what s cells will the motor be able to work on ok for sport running.

Thanks for any info.

Lenny D

[jimi911]

I'll get second in line for everything but the motor and strut. I would like the motor mount as well if its got the same bolt pattern as a Leopard 5692. I will pay the extra shipping to Canada.

[Dangerous_Toys]

With intent for whole package, Pending more info please.

What are the dimensions of the rail mount ?
Looking to put motor in the 48"Stealth mono.
And what s cells will the motor be able to work on ok for sport running.

Thanks for any info.

Lenny D

The motor will run up to 12 cells. 8 cells would get a 48" mono going pretty good. On 12 cells she would rip. the mount I believe is for 3 1/2" rails but could be blocked to accommodate a wider rail spacing. Actually I was tossing in the mount as a freebie.

[runzwithsizorz]

I'll toss my hat in the ring for the rudder, and servo.

[Brushless55]

how much power will that outunner put out??

[Dangerous_Toys]

I'll toss my hat in the ring for the rudder, and servo.

Waiting to hear from Lenny. I want to give him a fair shake since he posted first.

[Dangerous_Toys]

how much power will that outunner put out??

Here is the specs on the motor. She's a beast!



•Stator Diameter: 40.0 mm (1.575 in)
•Stator Thickness: 35.0 mm (1.024 in)
•No. of Stator Arms: 12
•No. of Magnet Poles: 8
•Motor Wind: 6 Turn Delta
•Motor Wire: 27-Strand 0.29mm
•Motor Kv: 800 RPM / Volt
•No-Load Current (Io/10V): 2.5 Amps
•Motor Resistance (Rm): 0.010 Ohms
•Max Continuous Current: 100 Amps
•Max Continuous Power : 4200 Watts
•Weight: 435 Grams (15.23 oz)
•Outside Diameter: 48.9 mm (1.925 in)
•Shaft Diameter: 7.98 mm (0.3 in)
•Body Length: 61.5 mm (2.38 in)
•Overall Shaft Length: 94.7 mm (3.73 in)
•Max Lipo Cell: 12s

The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

[Dangerous_Toys]

Here is a pic of it so you can get an idea of its size.

[lenny]

Pm sent for more info please.

Thanks.

[Dangerous_Toys]

Pm sent for more info please.

Thanks.

PM Replied

[runzwithsizorz]

Here is a pic of it so you can get an idea of its size.

Is it just me, or has the Jackson shrunk in size.

[Dangerous_Toys]

Is it just me, or has the Jackson shrunk in size.

Jackson is actually bigger. But take a good look at the serial number.......

[Dangerous_Toys]

Lenny I sent ya a PM