Ok Guys i have decided to sell the Brand New Skunkworks 29 i just finished.
I hate to do this but i am buying a PT45 Hydro from Phil Thomas and this will help fund that project..
Here is the list of parts and a link to the build thread here on OSE, everything is new on the boat.
Red and White Skunkworks 29 hull
Blue and Black Carbon/Kevlar reinforced
Custom Built battery trays w/ velcro to hold packs
Speedmaster 21 rudder w/water pickup
Speedmaster 3/16 round bottom strut w/bushing
Hughey 187 flex cable
S/B/P M445 prop
1/4" brass stuffing tube
prop nut
drive dawg
Hitec HS-5645mg servo
Racers Edge Billet servo horn
Gizmmotors Billet servo mount
4-40 steel rod and 4-40 ball ends for the linkage
OSE Rubber Boot
Leopard 4074 1774KV motor
OSE Billet water jacket
ETTI motor mount
Octura motor coupler
8mm Neutronics Bullets installed on the motor
Turnigy T-180a ESC w/ Neutronics 8mm bullets installed
Push/Pull on/off switch
Reedy 1600nah NiMh receiver pack
Traxxas water proof receiver box
Futaba R603FF receiver
Futaba 3PM transmittor
Aeromarin large bore bulkhead fittings
Aeromarine large bore water outlet fittings
Aeromarine 2nd water pick up, transom mount
All new water lines
Voltwatch
Pool noodle flotation
i think thats about it, here is the link to build thread http://forums.offshoreelectrics.com/...ad.php?t=21059
Asking Price for everything is $ 750.00 Shipped FedEx 3 day, w/ signature confirmation and tracking. Shipping price is within the CONUS only,small additional shipping fees for other than that, please contact me for a quote.
This is Ready to hit the water, just add Lipo's. The boat has been bench tested and all electronics dialed in for 4S2P set up
here are a few pics, many more in the build thread.
Thanks for looking,
Giz.
I hate to do this but i am buying a PT45 Hydro from Phil Thomas and this will help fund that project..
Here is the list of parts and a link to the build thread here on OSE, everything is new on the boat.
Red and White Skunkworks 29 hull
Blue and Black Carbon/Kevlar reinforced
Custom Built battery trays w/ velcro to hold packs
Speedmaster 21 rudder w/water pickup
Speedmaster 3/16 round bottom strut w/bushing
Hughey 187 flex cable
S/B/P M445 prop
1/4" brass stuffing tube
prop nut
drive dawg
Hitec HS-5645mg servo
Racers Edge Billet servo horn
Gizmmotors Billet servo mount
4-40 steel rod and 4-40 ball ends for the linkage
OSE Rubber Boot
Leopard 4074 1774KV motor
OSE Billet water jacket
ETTI motor mount
Octura motor coupler
8mm Neutronics Bullets installed on the motor
Turnigy T-180a ESC w/ Neutronics 8mm bullets installed
Push/Pull on/off switch
Reedy 1600nah NiMh receiver pack
Traxxas water proof receiver box
Futaba R603FF receiver
Futaba 3PM transmittor
Aeromarin large bore bulkhead fittings
Aeromarine large bore water outlet fittings
Aeromarine 2nd water pick up, transom mount
All new water lines
Voltwatch
Pool noodle flotation
i think thats about it, here is the link to build thread http://forums.offshoreelectrics.com/...ad.php?t=21059
Asking Price for everything is $ 750.00 Shipped FedEx 3 day, w/ signature confirmation and tracking. Shipping price is within the CONUS only,small additional shipping fees for other than that, please contact me for a quote.
This is Ready to hit the water, just add Lipo's. The boat has been bench tested and all electronics dialed in for 4S2P set up
here are a few pics, many more in the build thread.
Thanks for looking,
Giz.