Bump! Will sell hull with hardware separate if anyone is interested!
45" MHZ Mystic C5000 M Carbon/Kevlar + Hardware + More!
Collapse
X
-
What all is in the carbon install kit? Also are the stub-shafts for the scale drives included?Originally posted by domp444 View PostBump! Will sell hull and hardware separate if anyone is interested!
Is shipping included,, or what is shipping cost to 75098 TX??
Thanks,
RichNothing like keeping you lipos warm and your prop wet!!
Comment
-
Hey Rich. I'd like to keep the carbon install kit and drives with the the hull. They are included in the price of $1,100. The drives and rudder are installed very precisely (but not glued) so I'd like them to stay on there.
The carbon kit comes with 2 battery trays, 2 motor mounts, servo mount, and a pair of Velcro straps. And yes, the stub shafts are included.SV27 w/ Ammo 2300 / Stock ESC || Pursuit w/ Leopard 4074 2200kv / SeaKing 120a ESC || MHZ Drambuie on Ice w/ 2x Schulze 4.160wk's / 2x Neu 2215 1.5y's
Comment
-
Well, what I have has the hard work done for you.Originally posted by Greek75 View PostIf I only had the time, any interest in finishing most of it, or possibly rtr for more......
If you really don't have the time to finish it, what I would recommend is asking someone like BBYRacing or Cat-Boi, and seeing if they will complete the boat for you. They are very skilled at building and you would be very happy with the quality.SV27 w/ Ammo 2300 / Stock ESC || Pursuit w/ Leopard 4074 2200kv / SeaKing 120a ESC || MHZ Drambuie on Ice w/ 2x Schulze 4.160wk's / 2x Neu 2215 1.5y's
Comment
-
If anyone is interested in completing this cat, please pm me with what you think it would cost to build this the way it should be...approximate cost of parts needed to finish hull, suggested motors and esc's, if you have any of the motors or parts that would do this boat justice.... Open to suggestions.... I would finish myself, but really don't have the time to do it right..... I know someone talented is bored up north with everything frozen.... Of course if bbyracing or cat-boi is around, please pm me to let me know what you think...
Comment
-
As for motors and ESC's, I was going to run two Neu 1521 1.5d motors with two of the new Castle Hydra Ice 240A ESC's.Originally posted by Greek75 View PostIf anyone is interested in completing this cat, please pm me with what you think it would cost to build this the way it should be...approximate cost of parts needed to finish hull, suggested motors and esc's, if you have any of the motors or parts that would do this boat justice.... Open to suggestions.... I would finish myself, but really don't have the time to do it right..... I know someone talented is bored up north with everything frozen....SV27 w/ Ammo 2300 / Stock ESC || Pursuit w/ Leopard 4074 2200kv / SeaKing 120a ESC || MHZ Drambuie on Ice w/ 2x Schulze 4.160wk's / 2x Neu 2215 1.5y's
Comment
-
That was quick.. Thanks for the info, and if we can find someone to finish it....I really wish I had the time, but it would be sitting in my shop for the next six months before I had the time... I have a complete machine shop and plenty of machinists to make any parts, but they luckily are swamped too...
Comment
-
No problem. I will see if there is someone who would like to finish it for you and then I will let you know. Unless they post right here in the thread.SV27 w/ Ammo 2300 / Stock ESC || Pursuit w/ Leopard 4074 2200kv / SeaKing 120a ESC || MHZ Drambuie on Ice w/ 2x Schulze 4.160wk's / 2x Neu 2215 1.5y's
Comment
-
-
Comment