Fs: 1521 1.5d (new)

[MarkF]

Very unlikely you could twist that can. It would take alot more than mounting straps.

Mark

[Punisher 67]

I was going to post the same thing as Mark F, but that has been answered....

Lipo Power, is it possible that the straps are deforming the motor casing causing the rotor to make contact with the windings, just throwing some thing out for a suggestion.

Have you tried a different motor mount?

Not very likely my friend , It is virtually impossible for that aluminium strap to deform a stacked steel stator , the screw to tighten the strap would have broken long before that would ever happen . out of 500 built you are going to run into at least one turd...........

[LiPo Power]

The mount straps are not doing any deformation to the motor. This is a very good motor mount and the ends of it are only grabing the outside rings of the motor. Also, this mount was used before with no issue.
Robert

I was going to post the same thing as Mark F, but that has been answered....

Lipo Power, is it possible that the straps are deforming the motor casing causing the rotor to make contact with the windings, just throwing some thing out for a suggestion.

Have you tried a different motor mount?

[LiPo Power]

Right on time Peter!
I was right behind you with my post with few seconds.
Very good mount, thanks.
Robert

Not very likely my friend , It is virtually impossible for that aluminium strap to deform a stacked steel stator , the screw to tighten the strap would have broken long before that would ever happen . out of 500 built you are going to run into at least one turd...........

[Jeepers]

Not very likely my friend , It is virtually impossible for that aluminium strap to deform a stacked steel stator , the screw to tighten the strap would have broken long before that would ever happen . out of 500 built you are going to run into at least one turd...........

ok cool it was just a thought. I don't use that type of mounts so it was a suggestion. working in the heavy industry I do for many years. and seeing things happen that shouldn't happen. then having to repair all that, it caught my eye.

[m4a1usr]

Maybe this sort of arm chair debating should be moved to another forum. This seems hardly the place for a debate about the Neu "trend" of bad motors to continue.

Can the moderators lock this thread and let this crap die. A waste of bandwidth.

John

[Punisher 67]

ok cool it was just a thought. I don't use that type of mounts so it was a suggestion. working in the heavy industry I do for many years. and seeing things happen that shouldn't happen. then having to repair all that, it caught my eye.

No harm done , it is always good to entertain all possibilities...........

[LiPo Power]

John
Did you just came to read this thread becouse you would like to help with something?
Do you even know what is going on here and what the problem is???
I didn't think so....
I have a simple sollution for you...
If you do not like what is here, why are you here???
Keep your negative comments to yourself...
Ohhh and maybe this subject will be more appropriate for you to read:
http://forums.offshoreelectrics.com/...ead.php?t=8988
And for others here, thanks for your help here and under the general quastions and answers regarding this issue....

Maybe this sort of arm chair debating should be moved to another forum. This seems hardly the place for a debate about the Neu "trend" of bad motors to continue.

Can the moderators lock this thread and let this crap die. A waste of bandwidth.

John

[m4a1usr]

Your right lipo. Your frustrated about the motor and I have nothing to contribute.

John