Want to buy !!!!!!!!!!!

[bigpapa]

Want to buy 2, 3s 11.1v 2200mah 15C OR 20C lipos in great shape please show me what you have got offer..........

No taller than 1"

tks, todd

[HappyOne]

For your minicat hydro?

I have been using these http://www.hobbyking.com/hobbyking/s...00mAh_2S1P_20C

Hard to beat less than $9 each.

[JMSCARD]

You must have a higher kv motor then mr bigpapa because he is needing 3s 11.1v lipos.... Not 2s..... But you are right as far as brands go the 11.1 2200 20c hk lipos would work for him.....

[Rumdog]

Check out www.rclipos.com Excellent packs, free and FAST shipping. You can run less mah in these too. (if it is for the minicat) 1500mah is more than enough.

[HappyOne]

Oops. Copied the wrong battery. Mine are 3s too.

Sorry.

[JMSCARD]

Wow the really good deal I see with them is the 25c 2200mah 3s for $29 and free ship... For polyquests????? Thanks rumdog for the good lead.... I'm ordering a few now to try out there service:)

by the way the 25c's 2200's measure 29.5 mm tall= 1.16 inches for bigpapas sake:)

[bigpapa]

tks guy's just finished the amp energy minicat rebuild check it out in boat build section

[suckmywake]

Bigpapa, I am sorry the 6 Batts. didn’t fit but seem like you easily unloaded them with out problem. I also want to apologize for taking so long to get back in touch with you about esc coolers. Below are some pictures of the two coolers I was think about for you. The black one would be good for your 70A in your micro (nice and light) and the hand made AL will be good for your 200A Himodel. These are the coolers I use one my 70A and my 200A Himodel esc (shown in picture). They work a lot better than Etti because water is closer to the fets of the esc. I use JB weld to waterproof these esc. JB weld has worked the best for me. To do this just strip back insulation on batt. and motor wires of esc about 1/16” by where wire is soldered to esc. JB weld does not stick to insulation well but sticks well to the tinned wire. I then just JB weld up one side of the esc at a time. The other esc is a 100a that shows you how to JB weld around fets. The picture of the esc in the white boat is one I have in a small jet boat that is 70a and uses same cooler as black one. I would like $25 shipped for both cooler. Let me know if interested.

[bigpapa]

you have a pm my friend

[Jeff Wohlt]

Where arer you in Missouri? That one looks like a 200 amp Sky Wing ESC. How does it do for you?

[suckmywake]

I live in St Louis and I do go down to the lake alot.( Oss/shot out/poker runs)
As far as I know skywing/mystery/himodel/supersimple are made by suppo.(www.suppomodel.com) I like them alot. I think I have 5-200amps 1-120amp 1-100amp 2-70amp. I will be sending you email soon I am having problems with my HOTR cat piano wire drive lasting only 3 runs (.078) before breaking. I also wanted to tell you ARC motors.
Bob

[bigpapa]

bob did u get my pm