LF .150 cable and .130 collet

[Jesse J]

I lost a stub last trip to the lake (with my good prop) and have no more on hand.

Anybody have either a good condition .150" to 3/16" cable/stub they can part with OR just a .150 - 3/16" stub? It needs to be at least 8" (that sounds bad). It can be a back up or even used, but if it lets go on me I be a pi$$ed off kitty.

I could also use a still-functioning 5mm to .130 collet coupler for cheap.

Let me know what you have,
Thanks
J

[Jeff Wohlt]

If you do not find a cheapo cable/stub then let me know. If you only need 8" I can help you out.

[Jesse J]

Thanks Jeff, how much for an 8"er shipped, even in an envelope?

Problem is this, I need more stuff for my Fountain build and have over $100 in my cart on your site.... BUT little cash at the moment, so for now, all I need is the 8" .150 to 3/16".

[Jeff Wohlt]

Might also want to wait until I get these new struts done....bigger, stronger and ceramic bearings...with brackets, etc.

I will pm you but have to run out for a short time.

[Jesse J]

I will definitely want one of those struts for my 42" fountain build. But I still need the 8" cable.

[Jesse J]

Awright, make that a .187" cable/3/16" stub at least 8" long.... anybody??

Thanks
J

[m4a1usr]

I can hook you up with a Octura 5mmx130 coupler but the only flex in .187 I have is from my ProBoat TC31 conversion left overs from my builds. They are 11 1/2" long OAL but the flex is only 7 1/4". The rest is stub. Pretty long stub unless you are running a stinger.

John

[Jesse J]

nice, could you please line the cable up against a tape measure and snap a pic so I can see if there is enough? Also, would you have a .187" coupler too? I will take the .130 coupler and possibly the flex line. Thanks,
J

[m4a1usr]

Here's a pic of the flex assy (I have 2) would be gr8 for a mono using an Aeromarine stinger! I do have a 5mmx187 coupler but I would have to charge $9 for it. Its my spare and I plan on building a 40" plus Cat at some point where this one would go. But I dont need it right now.

John

[Jesse J]

Dude, thats perfect! I am totally fine with $9 for the coupler, understand.

How much for 1 flex + .187 coupler and .130 coupler
and how much more for second flex (if I understand you have two available)?

thanks so much!! and could you ship tomorrow so I have good chance for racing this weekend?

[m4a1usr]

Do you want it priority mail? Thats like $11.45. You can have all 4 pieces, 5mmx130 coupler, 5mmx187 coupler and both flex assy for $20 but its the shipping that will add. Your choice. I can get them out tomorrow.

John

[Jesse J]

Wont they fit in a small flat rate box for $4.80? I ship stuff all the time in those boxes, print labels out from paypal and its easy and not expensive.

[m4a1usr]

Wont they fit in a small flat rate box for $4.80? I ship stuff all the time in those boxes, print labels out from paypal and its easy and not expensive.

It might. I dont have an example in front of me to compare. But I will stop by the PO today and get one to see.

John

[Jesse J]

Yes then I will take it, let me know how much I owe you and pm me your paypal - I pay you directly.

thanks again for the help!

[m4a1usr]

Yes then I will take it, let me know how much I owe you and pm me your paypal - I pay you directly.

thanks again for the help!

Looks like it will work. I can get it out to you this afternoon. I recomend confirmation in case the package gets held up somewhere. Paypal is m4a1usr@netzero.net and let me know if the shipping adress is different then the one on the paypal notification. Thanks, John