like NEW proboat ESC
$35.00 shipped took it out of my apache 24 only ran the boat 2 times with it..converted to brushless.
Here is the ESC's specs:
Waterproof ESC with Reverse: 4.8-12V
Key Features
Reverse operation for more maneuverability
Completely sealed to operate even when wet
Automatic setup - no programming required
Anodized aluminum case
Overview
Pro Boat’s new waterproof marine electronic speed control is definitely one of the best new values in model boating. Anyone can upgrade their RTR boat from a mechanical speed control to the precision of a fully proportional ESC with reverse.
The unit’s completely potted electronics are sealed in epoxy and encased in a blue anodized aluminum shell that keeps operating temps cool. In addition to being inexpensive and waterproof, no programming is required. Set up is as simple as turning on the transmitter, turning on the receiver and moving the throttle to full forward, then full reverse. The speed control automatically memorizes the initial movements and provides proportional control between the extremes.
Specs
Forward:yes
Reverse:yes
Continuous Maximum Current:40 amps
Input Voltage:4-10 cells (4.8-12 V)
Input Connector Types:Tamiya
Output Connector Types:Bullet
Motor Limit:15 turns
Dimensions (WxLxH):42 x 47 x 13 mm
Weight:89 g
BEC Voltage:6.0VDC 1 amp. Max.
PWM Frequency:1000 Hz.
Full On Resistance:0.070 ohms
Here is the ESC's specs:
Waterproof ESC with Reverse: 4.8-12V
Key Features
Reverse operation for more maneuverability
Completely sealed to operate even when wet
Automatic setup - no programming required
Anodized aluminum case
Overview
Pro Boat’s new waterproof marine electronic speed control is definitely one of the best new values in model boating. Anyone can upgrade their RTR boat from a mechanical speed control to the precision of a fully proportional ESC with reverse.
The unit’s completely potted electronics are sealed in epoxy and encased in a blue anodized aluminum shell that keeps operating temps cool. In addition to being inexpensive and waterproof, no programming is required. Set up is as simple as turning on the transmitter, turning on the receiver and moving the throttle to full forward, then full reverse. The speed control automatically memorizes the initial movements and provides proportional control between the extremes.
Specs
Forward:yes
Reverse:yes
Continuous Maximum Current:40 amps
Input Voltage:4-10 cells (4.8-12 V)
Input Connector Types:Tamiya
Output Connector Types:Bullet
Motor Limit:15 turns
Dimensions (WxLxH):42 x 47 x 13 mm
Weight:89 g
BEC Voltage:6.0VDC 1 amp. Max.
PWM Frequency:1000 Hz.
Full On Resistance:0.070 ohms
I had a 3.5 nitro sent up here for $2.85 so that esc will not be much to ship
Comment