F/S Neu 1527/1Y 1250kv 8mm shaft NIB...

[nate]

I can get some pictures of Gilberts Hydro this week some time...

I would start with 45-47mm prop on 8s and yes,, I would run a HV-240 for sure...

If you would try and get some pic's of his boat please.

So just to make sure... a 37" hydro running 8s on an hv240, x445 and this motor should run atleast if not higher than 73-75mph correct?...

[txboatpilot]

If you would try and get some pic's of his boat please.

So just to make sure... a 37" hydro running 8s on an hv240, x445 and this motor should run atleast if not higher than 73-75mph correct?...

Cant say for sure,, until you run one on 8s?? Know what I mean... I would venture to say it will take x450-52 to reach 75mph.. I personally dont think that is a good running hull,, I would look at the SS45 and do the 8s 1y setup in it.. Much cleaner running hull.. Much more potential for high speeds and good handling.. The 37" Hydro when pushed past 60 starts to get real FLIGHTY,, adding wieght helped but that only brings the temps up..

I will get you some pictures tonight...

[bustitup]

If you would try and get some pic's of his boat please.

So just to make sure... a 37" hydro running 8s on an hv240, x445 and this motor should run atleast if not higher than 73-75mph correct?...

sent you a pm on the motor your looking for to FLY

ask tex about the 2215/2y

[Raydee]

Rich, I got the motor in the mail today. Thanks for the fast shipping, I almost forgot how long these motors are. I swear they look way longer without a cooling jacket on them