NEW Florida Fast Electric Club

[sailr]

Everybody bring a shovel.....remember? anybody have a small wheelbarrow? Anybody got a pick?

WHO HOO .

[tiqueman]

Thanks obrien. I'm really new to boats and don't have much of a clue.
I won't be able to make it early Sat morning but should be able to get there by 11 or so if the gathering is taking place. It's probably just as well since my back is on the fritz and I'd be useless for a work party.

Welcome Bill.

I see your from my original stomping grounds (Bayshore area)

[bill34207]

Welcome Bill.

I see your from my original stomping grounds (Bayshore area)

Thanks tiqueman. Yep pretty much just across 41 from it.

Thanks Jim for holding onto the table for me too.
I should get there around 11 or so. Have a previous engagement for early that morning. (gotta visit rothenbach and see if the scratch project I've spent two+ months on will fly)
Between boats & planes had to bring my charger and batts to work with me today so they'll be ready for tomorrow.

[rchippie]

My SV27 & outrigger have both been serviced . My lipo's have been charged as well. So im ready for tommorow.

[sailr]

I actually dusted off my SV27 and Hugh will be bringing his also!

My SV27 & outrigger have both been serviced . My lipo's have been charged as well. So im ready for tommorow.

[rchippie]

I actually dusted off my SV27 and Hugh will be bringing his also!

Cool

[obrien]

I have my batteries charged, the retrieve boat and generator loaded. I even did a little it of rough fiberglass work on the damaged UL1. Its not pretty, but it should do for tomorrow.
I will be a little bit late tomorrow, but I will be there.

[rchippie]

All my stuff is loaded & ready to go as well . MIKE your e-savage is fixed .

[rchippie]

It was nice meeting everyone today I had fun . I got the esc dried out & working again . The servo is also working . The reciver worked then it stoped . Then it worked again & stoped again . So im going to let it dry out some more before i try it again .

[bill34207]

It took me a while (was still processing vids at 11:00 last night) but finally got the videos from yesterday up on my website.

http://www.manatee-rc.com/Flight/Boats.html

While there check out the April 17th section of this page for a flight video of my scratch built Tigershark Delta. http://www.manatee-rc.com/Flight/SRQ10a.html

Had fun even if I was a dnf in the 1st hydro heat and dead last in the next one. Hopefully by next month I'll have the DF33 dialed in enough to be an obstacle for ya'll in P-mono.

[hebner]

Bill,
Thanks for posting those videos great job.
Hugh

[tiqueman]

Whos running the Apparition and whats the set up? Just curious to know if its the RTR package you can get from HOTR, etc, or not.

Great job on the vids Bill!

-Scott

[RayR]

Scott,

I have had the HOR Apparition for well over 18 months. Bought it as a bare hull with graphics. Currently running twin Turnigy Typhoon outrunners with Turnigy 120 speedo's, 4S 4000's per side. .062 wire drives spinning 442 props.

Not bad for $25 motors!

Pics here:

http://gallery.offshoreelectrics.com/thumbnails.php?album=48

All the best,

Ray

[RayR]

Bill,

GREAT JOB on the videos!

All the best,

Ray

[tiqueman]

Scott,

I have had the HOR Apparition for well over 18 months. Bought it as a bare hull with graphics. Currently running twin Turnigy Typhoon outrunners with Turnigy 120 speedo's, 4S 4000's per side. .062 wire drives spinning 442 props.

Not bad for $25 motors!

Pics here:

http://gallery.offshoreelectrics.com/thumbnails.php?album=48

All the best,

Ray

Ray thanks for the reply. That boat looks great!!! I recently finished my twin Hotr build. I will try to bring it to next months meet for all to see. Im 100% pleased w/ how it came out. It was my first twin build.