Eastern Massachusetts?... Reply If Interested!

[dwsjcw]

Norm, Sounds great - a little late in the season now and with the holidays coming up, but there is always next year.
Thanks,
Dave

[greenblast]

i would like to get together also. i also live on a pond and run my boats all the time. the big difference is if i see you in my yard i shoot first then bury next. i am hoping to have a couple of boats ready for next year. my brother has one also. so keep me informed. i could run some here.( i only run mine the neighbors dont mind! sorry no gassers) so no more excuses.lets run some boats with others in the hobby.

[blizard05]

I'm in Plymouth,jst geting started in FE,count me in. Norm ,are you on Island Grove pond,I used to live on Washington st Larry

[ncornacchi]

Yeah, we are on island grove pond...Happy Thanksgiving all....plan on some friendly UL1 races today with the family after dinner......

[10gauge]

Got it blizard05! We have at least 9 people now... Gentlemen, Start your (motors)! See you all in April-May...

[knpc]

Sounds good. I live in Randolph just south of Boston. Should be nice to have some other boats to race against and talk shop.

What type of boats do you guys have? It would be nice if there were some similar setups.

[blizard05]

I'm located in Plymouth . I'm just geting started in FE. I have a 1/10 cracker box scratch built, going from gas to FE (too much noise). Building a Dumas skadle 2 for electric power. Larry

[ncornacchi]

UL-1's over here..But, i'd like to build a rigger this winter or maybe get a nice Cat.

[racer66]

Just what I was looking for. Looking for a bunch of local guys to meet and run with. I am 40 min. from Boston. Hoping to get a Aquacraft UL-1 this winter and get it ready for the spring.

So, count me in boyz!

[blizard05]

UL-1's over here..But, i'd like to build a rigger this winter or maybe get a nice Cat.

Zipp Kits has some rigger kits, check them out. Whtch UL 1 do you run? Larry

[10gauge]

It seems there are a lot South Shore guys... Great, I go to the Cape often and it'll be along the way.

The H&M XsessII hull is really nice rigger with a 1515/1Y Neu or a Feigao 7XL or 8XL motor running 4S and CC240 ESC. You should be able to push 70mph. http://www.hydromarine.de/hm_11351.htm. Contact Oliver Siess. However, the exchange rate may not be great now. The two Aussies, Andym and Xzessperated, are very helpful and are masters on this hull. Here is the thread which helped me:

http://forums.offshoreelectrics.com/...light=xzess+ii

there is also a video link by them in thread too - absolutely amazing speed! A hydro requires great skill and technique to run correctly. I haven't finished the build as I've been so busy... SprintCat 40 is next since I have a 5in rail mount, 1527/1.5D, and CC240HV lying around.

[greenblast]

i run a meanmachine with a 9xl on 4s witrh a himodel 2ooa also a 4s oberto hydro i got in the swap shop from mpg. also with a 9xl.only ran a couple of times and i think thats going to be my favorite becuase you are always on the seat of your pants! i also have a villian on a sc 700 that i just cant get to run right so it is always on and off again.i hope to at least have one not smelly when you guys run.

[10gauge]

Hey Greenblast, I have the same setup on my MM - the 9XL is perfect for 4S. I use a m545 and the speed reaches 50mph. That's about the limit for a Feigao XL motor on the MM. A Neu 1515/1Y can get you an additional 5-10mph. You can push 60mph on this hull, but everything has to be setup perfectly.

I have the UL-1 that's still in the box. I'll have to make the mods to the turn fin over the winter.

Hey guys, don't forget to recharge your LiPos every 3 months to keep them fresh!

Another 4.5 months until we hit the water - YAWN!

[ncornacchi]

I cooked a newly rebuilt/repainted setup last TDay. Fiegao 540XL, Etti 150 w/caps, JW wire drive, Grim L40 57/3...I stupidly did not seal the shaft tube to wire drive exit at motor and took in water, fried controller...and smoke on the water....

[99z286spd]

Hi guys
New here.... would love to run with ya....I have an AQ UL1 and a Warehouse hobbies Enforcer MAN O WAR....I would love some company this year..I live in Southborough Ma so anyone game....let me know