Namba voting is open. Lets vote in sizes and get 2019 moving. Flame suite on :-)

[Brushless55]

Correct. Simple tech. Tune your setup and go race.

Right.
Next question that I've not seen anywhere, is it okay wires coming out the side of the can or back?
Covering all my basics.

[raptor347]

Doesn't matter.

[Brushless55]

Doesn't matter.

Awesome, thanks Brian..

[T.S.Davis]

Correct. Simple tech. Tune your setup and go race.

Wait, you mean it's easy to measure 37mm diameter and then measure 60mm in length? Sounds pretty easy to me. A contest director could even have a tool made with the two dimensions that made it take less than a 5 seconds to check.

[raptor347]

Wait, you mean it's easy to measure 37mm diameter and then measure 60mm in length? Sounds pretty easy to me. A contest director could even have a tool made with the two dimensions that made it take less than a 5 seconds to check.

It does mean people have to think about setup more. It's no longer a cookbook class.

[Brushless55]

It does mean people have to think about setup more. It's no longer a cookbook class.

This will make things interesting for sure!!

[HTVboats]

At our Florida race in March we inspected 1st-3rd in all the P/Limited and Q/limited finals. Simple visual and we didn't need to pull out a caliper. It was 2 minutes in the hot pits after the heat to untape. It kept everyone on notice of enforcement and nullified grumbling or sour grapes that someone possibly cheated. Again rules are only as good as their enforcement and 37X60 and 40X75 are easy to identify without pulling engines out.
Mic

[Doug Smock]

Step by step on how to "roll your own" motor fellas!

https://forums.offshoreelectrics.com...-winding-class

[Brushless55]

At our Florida race in March we inspected 1st-3rd in all the P/Limited and Q/limited finals. Simple visual and we didn't need to pull out a caliper. It was 2 minutes in the hot pits after the heat to untape. It kept everyone on notice of enforcement and nullified grumbling or sour grapes that someone possibly cheated. Again rules are only as good as their enforcement and 37X60 and 40X75 are easy to identify without pulling engines out.
Mic

Q Limited, now that sounds fun!

[zooma]

Looks like, now that voting is over, the rule changes are not available on the NAMBA web site or member portal. Can anyone here reproduce the newly passed P-Limited motor specs?

[HTVboats]

http://namba.com/content/library/rules/namba_rulebook.pdf

In the book 37mm X 60mm, length includes any bearing protrusions.
Mic

Sidebar Q limited: a local class growing on the west coast of Florida. Take any full "P" and try a 1600kv 40X74 on 6S and you will be amazed how fast it will go. At a fraction of the price. We are even seeing a resurgence of outboard tunnels. Current 45 nitro hulls match the power well. When the tunnelheads tried full Q they found it expensive and a 40X82 really is too fast for the hulls. Fun but when you go upside down too often and only a few finish the class dies. The 40X74 on a 45 size hull (many out there collecting dust) will go 50-65mph and need less ma than a 40X82 or larger. It will finish more heats. That and a Flycolor 150 will work well. The JAE 33 will run mid 70's and make 6 laps on 5000ma. Q/limited can be an inexpensive step up for a P/limited racer rather than a full P or Q requiring 200+ amp esc's.

[Steven Vaccaro]

Step by step on how to "roll your own" motor fellas!

https://forums.offshoreelectrics.com...-winding-class

Such great info!!! Thanks!

[Doug Smock]

Such great info!!! Thanks!

"But wait, there's more"..
https://forums.offshoreelectrics.com...he-SQUID-motor

[Doug Smock]

Some good stuff here as well.
We may have to open a motor building sub forum..LOL

https://forums.offshoreelectrics.com...p-report/page3

[HTVboats]

Not sure how many people will actually start rewinding, but this all does give a better understanding of how and why things work. Makes us better consumers. Somehow I know my rewindings would be slower than out of the box or just plain incendiary devices.
Mic