NAMBA P-LIMITED Motor List - Pro Boat Motors NO LONGER AVAILABLE

[Steven Vaccaro]

If rule passes I'm ready (motor pic's stolen from IW posted by )


[ATTACH=CONFIG]162717[/ATTACH]


[ATTACH=CONFIG]162715[/ATTACH] [ATTACH=CONFIG]162716[/ATTACH]

In the end the best driver will win. My son can run a boat that is loose as a goose, if I try the same setup, I roll or flip over rather quickly.

[T.S.Davis]

In the end the best driver will win. My son can run a boat that is loose as a goose, if I try the same setup, I roll or flip over rather quickly.

Yeah, it's the father curse. Ya teach em everything and they bury ya with it. haha

[Steven Vaccaro]

Yeah, it's the father curse. Ya teach em everything and they bury ya with it. haha

who are you fooling, its old age.

[rayzerdesigns]

If rule passes I'm ready (motor pic's stolen from IW posted by )


[ATTACH=CONFIG]162717[/ATTACH]


[ATTACH=CONFIG]162715[/ATTACH] [ATTACH=CONFIG]162716[/ATTACH]

You would still find a way to blow them up��

[Steven Vaccaro]

You would still find a way to blow them up��

The connectors will go first, unless you use the Huff/Smock super connectors.

[properchopper]

You would still find a way to blow them up��

I finally quit blowing them up because the last time I tried I burned my lips on the endbell

[fweasel]

I finally quit blowing them up because the last time I tried I burned my lips on the endbell

Tony Heller ladies and gentleman! He'll be here all week. Please don't forget to tip your waitress.

[H&YRACING]

IMG_2932.jpg
Here's a picture of my Neu 1515 that fits the dimensions. See you at the races.

[TRUCKPULL]

If rule passes I'm ready (motor pic's stolen from IW posted by )


[ATTACH=CONFIG]162717[/ATTACH]


[ATTACH=CONFIG]162715[/ATTACH] [ATTACH=CONFIG]162716[/ATTACH]

This picture that Tony posted of the carbon fiber can brought back memories.

Back in the day -I had a Hacker 7XL with a carbon fiber can. in my "P" Sport Hydro.( No cut outs on the can though - water cooler still fit.)

Larry

[T.S.Davis]

[ATTACH=CONFIG]162775[/ATTACH]
Here's a picture of my Neu 1515 that fits the dimensions. See you at the races.

I wouldn't risk it. Most CD's would say "can" dimensions.

[trigger]

Terry its small enough it will/could fit in a can......... (edit will/could)

[T.S.Davis]

How did he get a 40mm motor down to under 36.2mm?

[trigger]

He is ever the creative person . I'm sure he'll tell you the story over a beer when you see him at the races/cup...... I can't believe he managed/did even post it up. (no offence H&Y.....)

[Steven Vaccaro]

[ATTACH=CONFIG]162775[/ATTACH]
Here's a picture of my Neu 1515 that fits the dimensions. See you at the races.

Doing a search of a brushless motor componets brings up many draws.
Most of which, reference Housing, Stator and Rotor. So Id think the motor on the right is missing the housing.

[properchopper]

With the updated rule for P-Ltd potentially going into effect (if it passes in D19 and/or elsewhere) there can be some interesting developments in powerplants whereas before, under the old list AND "as delivered" rule, winning took some precise setup and as Steven said, driving counts heavily.

Personally I have had the absolutely most memorable racing moments when my boat was pretty equal to the rest of the field and the battle was rail to rail or one close behind the other lurking for a passing opportunity (or having the lead boat get psyched out & bobble). Ask Mike (theShaugnessey) - we've had those prized moments. Having a "ringer" banzai- motored rig way out front by virture of its' clever rule-massaging and by its lonesome might be one way to get points and that's good too. I'd rather have someone by my side racing together. Just my 2c.