2017 Winter Warmups

[RandyatBBY]

Upon looking at the Leopards the 4082X2 motor with the 1600kv looks interesting, as we are going pretty fast with the limited 1500kv motor I would try this motor with a 450/2 or a 452/2 prop. This actually seems pretty enticing as I've been Thinking about a change for my P-Offshore setup. I have a Neu 1521/1Y that is 1577Kv I think I'm going to try that!!!!

Well this is good for me I have the Neu 1521/1Y 1577Kv, and Steve Slusher has the Neu 1521 1.5D

[ray schrauwen]

Randy, if it were myself and I was lookin for a TP setup, the TP I would look at is the 3650/3Y (2060kv) that looks comperable to the Neu 1521, you could also use it in straight up P-mono too. I would try it and prop it with a M445 (a little less blade than the X445). It will prob be a little more efficient than the Neu 1521 B/C its a Y wind and not a D wind. Anyone think or know and different let him know.

Typically 36mm motors are more efficient than 40mm motors. Many use the same diameter rotor for the 36mm as what goes into a 40mm. Yes Y winds like 1Y's are easier on esc's.

[ray schrauwen]

Is the old Pro Boat Water Cooled RC Brushless Marine Motor PRB 3310 A3630 - 1500 KV the same as the new Dynamite DYNM3835 A3630-1500Kv 6-pole Water-Cooled Marine / Boat Brushless Motor ?

Dunno but I'm sticking with the DYNM3835 http://www.ebay.com/itm/191717747608...%3AMEBIDX%3AIT

$54US and Ray Presnell seems to make them sing.

[T.S.Davis]

P offshore
TP 4060 1950kv on 4s10k with an x450. Easy breezy lemon squeezy.

[ray schrauwen]

P offshore
TP 4060 1950kv on 4s10k with an x450. Easy breezy lemon squeezy.

If you had a perfectly fine Neu 1521 1.5D and the motor you mentioned, which would you choose over the other? I have two 1521's bought used on swap shop a couple years ago and they run awesome. P mono and offshore, just change prop.

[RandyatBBY]

If you had a perfectly fine Neu 1521 1.5D and the motor you mentioned, which would you choose over the other? I have two 1521's bought used on swap shop a couple years ago and they run awesome. P mono and offshore, just change prop.

You would think the Neu would be better wound.

[T.S.Davis]

Interchangeable in my opinion. We've do e both. They're so close that it will come down to driving.

[madmikepags]

anyone here need a 1530/1Y?

[MarkF]

Thanks for all the suggestions guys. I guess the TP 5650 motor looks good to me because it's 1/2 the price of the Neu and it's a 6 pole and a little over 100gr heavier so should have more power for more aggressive or bigger prop.
Can the Neu swing a 455 prop?

Mark

[madmikepags]

I've swung a 457/3 pitched up on my sprintcat with no problems. Also ran a prather 250 on my Q-Sport whip with that motor. The should have no problem swinging that wheel.

[RandyatBBY]

anyone here need a 1530/1Y?

What is the kv? 1300?

[RandyatBBY]

Steve was real impressed with you guys, he learned a little too. He wants to come back next year. So Looks like we are going to be back again.

[ray schrauwen]

1100kv

[RandyatBBY]

1100kv

Thanks Ray

[MarkF]

Ray P
Are you going to the race in Needles? I signed up my T mono. For those of you that saw my T mono at WW the flier 12s 320 amp esc that I tried burned up after 4 laps. The second one I have, they sent me 2, is working fine. I know some of you were interested in the new flier esc and the first one that burned up I think was a fluke. We'll see how the second one holds up though.

Mark