I just finished this build this weekend, it's a Cheetah with twin TP 4060s 1450kv and Swordfish 200 Pro Pluses run on 6s. Pearl Yellow paint with hand cut Cheetah spot vinyl graphics, Windshield decal and Cheetah lettering decal from Mono Jeff. Carbon Fiber parts from Kent Nata2run. Going to see how it does in the water next weekend. here's some picsDSC02400.jpgDSC02401.jpgDSC02403.jpgDSC02405.jpgDSC02407.jpg
-
Last edited by flraptor07; 04-07-2014, 09:23 PM. -
Dayum!!! That thing is badass! Very nice job. What speed are you looking for?32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
The answer is, how fast can it go and still stay in the water!Originally posted by kfxguy View Post
With two TP 4060s (40mm x 88mm) on 6s there's no way I'll ever go as fast as it could go
But 70mph would be nice if I can get it dialed in
Thanx
Comment
-
Damn Chris that's one sweet Cheetah. Your vinyl work is kick ass. Those exhaust coming out transom are awesome. Those stingers are also very nice. What size are they? JeffComment
-
Thanx Jeff, The exhausts are the water outlets too. the stingers are 3/16 and adjustable length from 110mm to 130mm. I had to cut the mounting pad down some and redrill the holes so they would fit on the transomsOriginally posted by Jlov View PostComment
-
Really nicely done, of the best looking cheetahs out there.
Should run well in the straights and even better around turns. Again nice work look forward to running videosComment
-
Hey Chris, always wondered what happened to this one, and here it is! Looking cool dude. Like the vinyl job! Are you happy with the carbon?Visit www.customcfparts.com | Custom Boat Building | Custom Carbon Fiber Parts | Custom Graphics | LMT Premium Dealer | MGM Premium Dealer | YouTube | Facebook
"Follow someone's footsteps and you will always be a step behind"Comment
-
Oh Yeah, very happy with the Carbon! It wasn't that long ago you did the ESC cover..Originally posted by nata2run View PostLast edited by flraptor07; 04-08-2014, 05:42 PM.Comment
-
I think you should mount the switches on the underside of the cf plate32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
I plan on flush mounting them from the underside, just haven't done it yetOriginally posted by kfxguy View Post
Comment
-
Better idea!Originally posted by flraptor07 View PostI plan on flush mounting them from the underside, just haven't done it yet32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
-
Or just cut them off if you want. I remove mine and solder the wires together. Personal preference. Nice looking boat by the way.Originally posted by flraptor07 View PostI plan on flush mounting them from the underside, just haven't done it yet"There's nothing else I really want to do other than get up and build boats." - Mike FioreComment
-
Thanx Joel, I thought about that but I kinda like having them, if they ever go bad I'll probably cut them off.Originally posted by Rocstar22 View PostComment
-
I dont havr switches on any of my esc's . I just unplug battery32" carbon rivercat single 4s 102mph, 27” mini Rivercat 92mph, kbb34 91mph, jessej micro cat(too fast) wasComment
Comment