Ml SX400

[Moonie]

I can use some help on this one. COG, strut location and rubber length? My 400 chops in the turns. IMG_1696.jpgIMG_1692.jpgIMG_1529.jpg

[cybercrxt]

Middle of the turn fin for the CG, and if you happen to be running a flat bottom strut, you need to change that to a round bottom, and you should be using an X series Octura 2 blade prop, or ABC 2 blade cleaver prop. Hope this helps! Mike

[Moonie]

Middle of the turn fin for the CG, and if you happen to be running a flat bottom strut, you need to change that to a round bottom, and you should be using an X series Octura 2 blade prop, or ABC 2 blade cleaver prop. Hope this helps! Mike

Thinks Mike. It's all worked out now. Your the man and the boat is everything you said it would be on your web site.

[Moonie]

https://youtu.be/teJt0FZc4qc

Here's a video with not to bad of a setup so fare.

[cybercrxt]

Wow, great work! That thing is movin! I can't believe you are getting that kind of performance from a 1521 Neu. That is a large, heavier hull, so that is really impressive to me!

[Moonie]

Wow, great work! That thing is movin! I can't believe you are getting that kind of performance from a 1521 Neu. That is a large, heavier hull, so that is really impressive to me!

Sorry Mike. I missed label that motor in my comments. It's a just a bigger 1527

[teamgear1973]

Dang that thing was toting the mail! Nice boat bud

Sent from my SAMSUNG-SM-J120A using Tapatalk

[Moonie]

Dang that thing was toting the mail! Nice boat bud

Sent from my SAMSUNG-SM-J120A using Tapatalk

Thanks its getting a lil more tuned in now.

[Moonie]

https://m.youtube.com/watch?v=QhJ_XKhHcBc

I got the hopping all out. I found out what it was that was making the boat hop out the wayer

[785boats]

So what was it?

[Bp9145]

So what was it?

there was an alien driving that boat. . .crazy impressive speeds. . .you have a nice one there Moonie. . .

[Moonie]

The turn fin was lifting the right sponsons. I adjusted the turn fin to hold it down.

[Beaux]

Nice boat buddy.