ML Boatworks RSX310 , My 1st Outrigger design ever! 31", P/ P-ltd FE Rigger!

[cybercrxt]

Finally, a full instruction manual for the RSX series is done! Email me for a copy anyone that needs one!

[ray schrauwen]

Can someone advise me on the size of bolts used to secure the sponsons to the booms?

Someone said they used 2mm bolts and tapped the carbon rod. I don't have any 2mm bolts around and not enough 2-56 bolts.

[Moonie]

Can someone advise me on the size of bolts used to secure the sponsons to the booms?

Someone said they used 2mm bolts and tapped the carbon rod. I don't have any 2mm bolts around and not enough 2-56 bolts.

Ray Someone ment to say 3/32 not 2mm. I hope that helps you.

[TRUCKPULL]

A #4 is 7/64" or 2.8mm
A #2 is 2.1mm

So what size bolt is 3/32" ??

Larry

[ray schrauwen]

I'll see what I can find at local vendors.

Thanks

[mojoracer]

Finished Product!
20180616_155150.jpg20180616_155133.jpg

[ray schrauwen]

Nice work Bob!

[RayR]

My take on the RSX310

[Brushless55]

That is sweet!

[Steven Vaccaro]

Ray that looks great.

[ray schrauwen]

Here ya go Ray. No Mojo speed secrets on this one..... Tube was easy and gentile bend. Motor mount is a raffle prize I picked up along the way (and OSE sells them too). I put the mount in with Epoxy and pop rivets from underneath. I also added 1/8th plywood to the tub floor in the motor area. I did shim the mount to get more angle. I set the motor to clear a TP 4060 if need be, but probably will run the little NEU motor for P. I also re-did the 5/16th tube after the photo to get better flex alignment. Using Speedmaster small extended strut and mini rudder. Rudder and strut brackets are tight together. I am using a Castle modified airplane ESC that Mr. Buaas did for me. Battery options I am looking at are a single 4S 6000 or pair of 4S 3300s (tight fit)! Will probably run a single 4S 5000 for limited set up. Enough room in the tub for multiple battery configurations!

I wonder how much you shimmed the front of motor mount?

Hello Bob! lol... Yeah, still not done but I just need to rig and paint.

[mojoracer]

I wonder how much you shimmed the front of motor mount?

Hello Bob! lol... Yeah, still not done but I just need to rig and paint.

Looks like 1/8" plywood Ray.

[ray schrauwen]

Thanks Bob. Your rudder mount overhangs a bit on starboard side I guess???