Venom EKOS Aluminum Props

[Chris Nicastro]

VENOM GROUP
Available October, Venom™ Pro Machined and Cast Aluminum Props for the EKOS
Designed for those looking to get the most out of their Venom Electric King of Shaves R/C Boat,
Venom is proud to release their new line of Aluminum Props. For the ultimate setup, the Pro
Machined props are precision CNC machined in aluminum and then anodized in an attractive red.
For those on more of a budget but still looking for the strength and durability of an aluminum prop
the cast aluminum props are a perfect option.

Part # Description *Retail Price
VEN-1989 Pro Machined Prop 32mm 1.4P RT- EKOS $49.99
VEN-1990 Pro Machined Prop 32mm 1.4P LT- EKOS $49.99
VEN-1991 Pro Machined Prop 36mm 1.4P RT- EKOS $49.99
VEN-1992 Pro Machined Prop 36mm 1.4P LT- EKOS $49.99
VEN-1993 Alum Prop 32mm 1.4P RT - EKOS $21.99
VEN-1994 Alum Prop 32mm 1.4P LT - EKOS $21.99
VEN-1995 Alum Prop 36mm 1.4P RT - EKOS $21.99
VEN-1996 Alum Prop 36mm 1.4P LT - EKOS $21.99

*Note: Retail Prices are for US Customers Only
Venom products can be found at hobby shops throughout the U.S. and over forty-five countries worldwide.
For more information, visit Venom online at: www.venom-group.com.
For more information contact Venom directly at 800-705-0620 or email us at sales@venom-group.com.

[Props]

This is GREAT! What size prop comes on the boat out of the box?

Can these be pre-ordered through Venom?

[Chris Nicastro]

The stock prop is 36mm dia X 1.4P x 3B. The alternate prop is 32mm X 1.4P X3B. So the same specs have been made in alloy.

You can place your order on our site or thru your local hobby shop. I would do so as soon as possible these are limited production currently as we are testing the market and products.

[Flying Scotsman]

Aluminium props are OK but you will be better off with a copper/ beryllium, balanced and sharpened prop by yourself for a much lower price than those offered by Venom.

Douggie

[wolf IV]

What size are the bore holes on these? Or shaft size would be the same.

[Chris Nicastro]

We have these props in stock and we have limited quantities for the first run of production. Please place your order very soon if you have not done so already.

Thanks!

Chris

[Chris Nicastro]

What size are the bore holes on these? Or shaft size would be the same.

Stock size is 4mm ID.

[NitroVal]

DO you guys have the conical prop nuts in yet?

[Chris Nicastro]

No we dont at this time.

[blacksheeptrails]

can i put a x442 octura prop????

[blacksheeptrails]

I guess i can. The king ran smooth as ice with 2 x 442 props pushing it out of the water.They sound great. No overheating anywhere.I'll get some video soon.

[Chris Nicastro]

I got your PM and answered it but I'm sorry I was away so I didnt get around to any replies recently.
Since you tried it and it worked for you thats great but take care and watch your temps and amp loads carefully. Those are large props and I would not suggest using any more than 3S power with the the stock set up. You have the same pitch as the stock props but much more diameter so the load is higher just not as high as if you had gone to props with more pitch and diameter.
Have fun,

Chris

[Brushless55]

I guess i can. The king ran smooth as ice with 2 x 442 props pushing it out of the water.They sound great. No overheating anywhere.I'll get some video soon.

keep us updated, not many good videos out there on this cat..
we would love to see yours run!

[arrowskartax9]

Hi Chris. Will their be a pro machined 3 blade prop for the P1 Mono King of Shaves??
Thanks, Chris.

[Chris Nicastro]

Im not sure at this time but we probably will.

Chris