Venom KOS P1 Twin Outrunner Setup

[Alfa Spirit]

PS : people ask me where this motors mount come from, I assembled two single motor mount, here is the link :

http://cgi.ebay.fr/Xpower-B36-540-55...item2a1d143c28

[lenny]

They look like nice mounts and stingers,
How much are they US dollars shipped each ?

[Alfa Spirit]

Stingers come from HOR,

http://www.horracing.com/product_info.php?products_id=430

[Alfa Spirit]

I had oportunity to buy a pair of Scorpion HK-3026 1400kV new in the box , this model is discontinued, that's why I bought them for a very very good price.

What do you think with a 6S 6000mAh battery? Around 32000 RPM unload.

[Alfa Spirit]

An other picture This P1 hull is nice, finish is very nice too

[Alfa Spirit]

Instead of one battery I will use two 3300/4000mAh batteries, something like this Zippy http://www.hobbyking.com/hobbyking/s...dProduct=21358 Total capacity = 7400mAh, total constant discharge = 185A

[JrValente]

It's useless until you install some hardware on that boat.

[Alfa Spirit]

Instead of one battery I will use two 3300/4000mAh batteries, something like this Zippy http://www.hobbyking.com/hobbyking/s...dProduct=21358 Total capacity = 7400mAh, total constant discharge = 185A

What do you think? I need your advice

[Alfa Spirit]

Long bracket and T bracket part fit well for the inline mount Rudder blade is shorter.

[Rumdog]

Build something!

[Alfa Spirit]

I' ll put the Scorpion in the Rapid, the P1 KOS will be powered with twin FMT 3650 1700kV with 2x5S

[Alfa Spirit]

The rudder is a TFL model with 3 carbon plates for a longer bracket

[lenny]

Hears a old twin that runs for some info.

[Alfa Spirit]

I made a motor mount for the twin FMT outrunners, without that ugly orange color

[Alfa Spirit]

Those 70mm stingers are very cool. Flex cables are 1/8" and shafts are 4mm, they are glued with Loctite 648. I use 4mm to 3/16" adapters for propellers.
I like the result